AU-814-NV - Headphones ELBE - Free user manual and instructions
Find the device manual for free AU-814-NV ELBE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Over-Ear Headphones |
| Brand | ELBE |
| Model | AU-814-NV |
| Color | Navy Black |
| Connectivity | Wireless (Bluetooth) and Wired (3.5mm) |
| Bluetooth Version | 5.0 |
| Wireless Range | 10m (33 feet) |
| Battery Life | Up to 20 hours of playback |
| Charging Port | USB-C |
| Charging Time | Approximately 2 hours |
| Driver Diameter | 40mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 Ohm |
| Sensitivity | 98dB ± 3dB |
| Weight | About 210g |
| Foldable Design | Yes, foldable for portability |
| Built-in Microphone | Yes, integrated microphone for calls |
| Controls | On-ear buttons for music and calls |
| Noise Reduction | Passive noise isolation |
| Included Accessories | USB-C cable, 3.5mm audio cable, user manual |
| Compatibility | Smartphones, tablets, and computers with Bluetooth or 3.5mm port |
| Warranty | 1-year limited warranty |
| Maintenance | Clean with a soft dry cloth; avoid liquids |
Frequently Asked Questions - AU-814-NV ELBE
How do I pair the ELBE AU-814-NV with my phone?
To pair, hold the power button for 5 seconds until the LED flashes blue and red. Then enable Bluetooth on your phone and select AU-814-NV from the list.
How long does the battery last?
The headphones provide up to 20 hours of playback on a full charge. Battery life may vary based on volume and usage.
How do I charge the headphones?
Connect the provided USB-C cable to the charging port and a power source. A full charge takes about 2 hours. The indicator light turns off when fully charged.
Can I use the headphones while charging?
Yes, you can use the headphones in wired mode while charging. Wireless playback during charging is not recommended for battery health.
How do I reset the headphones?
If the headphones malfunction, press and hold both the volume + and power button for 10 seconds until the LED flashes three times to perform a reset.
Are the headphones compatible with my device?
The headphones are compatible with most devices that support Bluetooth 5.0 or have a 3.5mm audio jack. This includes smartphones, tablets, laptops, and desktop computers.
How do I clean the headphones?
Wipe the ear cushions and headband with a soft, dry cloth. Do not use alcohol or abrasive cleaners. Remove the ear cushions if deep cleaning is needed and clean them separately.
What should I do if the sound is distorted?
Check the volume level on both your device and the headphones. Ensure the headphones are fully charged and there is no interference from other wireless devices. Try re-pairing your Bluetooth connection.
Can I use the headphones for gaming?
Yes, the headphones work for gaming on consoles, PCs, and mobile devices in wired mode for low latency. Bluetooth may introduce slight delay, so wired connection is recommended for gaming.
How do I replace the ear cushions?
Gently pull the old ear cushions off the drivers and snap the new ones into place. Spare ear cushions can be purchased from ELBE customer support or authorized retailers.
User questions about AU-814-NV ELBE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual AU-814-NV - ELBE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AU-814-NV by ELBE.
USER MANUAL AU-814-NV ELBE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELBE
Model : AU-814-NV
Category : Headphones