DFE-570TX - Network card D-LINK - Free user manual and instructions
Find the device manual for free DFE-570TX D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Network adapter |
| Brand | D-Link |
| Model | DFE-570TX |
| Interface type | PCI 32-bit |
| Number of network ports | 4 |
| Supported data rates | 10/100 Mbps per port |
| Network standards | IEEE 802.3, IEEE 802.3u |
| Duplex mode | Full duplex and half duplex |
| Auto-negotiation | Yes |
| LED indicators | 4 x link/activity LEDs |
| Bus power | PCI bus powered, 5V |
| Power consumption | 2.5 W max |
| Operating temperature range | 0°C to 40°C |
| Storage temperature range | -20°C to 70°C |
| Humidity range | 10% to 90% non-condensing |
| Dimensions | 120 x 107 x 20 mm |
| Weight | 100 g |
| Maintenance | Clean with a dry, soft cloth |
| Cable support | UTP Category 5 or higher |
| Included in box | Card, low-profile bracket, driver disk, manual |
Frequently Asked Questions - DFE-570TX D-LINK
How do I install the D-Link DFE-570TX in my computer?
Turn off your computer, open the case, insert the card into an available PCI slot, secure it, and close the case. Power on and install the drivers from the included disk or download from D-Link's website. The card supports plug-and-play and should be detected automatically.
Which operating systems are compatible with the DFE-570TX?
The DFE-570TX supports a wide range of operating systems, including Windows Server 2003/2008, Windows XP, Vista, 7, Linux, and Novell NetWare. For newer OS like Windows 10, you may need to use the legacy driver or a vendor-provided driver.
Can the DFE-570TX provide 100 Mbps speed?
Yes, each port can negotiate at 10/100 Mbps with auto-negotiation. Use Category 5 or higher cable to achieve 100 Mbps.
Does the card support full-duplex operation?
Yes, the card supports full-duplex and half-duplex modes on all four ports, allowing simultaneous transmission and reception.
How many computers can connect to the DFE-570TX?
As a quad-port network adapter, you can connect up to four independent network cables. It is ideal for servers or firewalls requiring multiple LAN segments.
Is the card compatible with Wake-on-LAN?
The DFE-570TX supports Wake-on-LAN (WOL) on selected ports. Connect the motherboard WOL cable to the card if required, and enable the feature in driver settings.
What type of cable should I use with this adapter?
Use UTP Category 5 or higher twisted-pair cable with RJ-45 connectors. For 100 Mbps, ensure the cable is rated for at least Category 5.
Why is my DFE-570TX not detected by the system?
First check that the card is firmly seated in the PCI slot and that the computer is powered off during installation. Also, verify the PCI slot is working and that the card is not faulty. Try installing in another slot and refresh the system's hardware scan.
Can I install multiple DFE-570TX cards in one server?
Yes, the card supports standard PCI bus sharing, and you can install multiple cards to increase the number of ports. Ensure you have enough available PCI slots and IRQs.
How should I clean the DFE-570TX network card?
Disconnect the card from power and, using a dry, soft cloth, gently wipe the PCB and connectors. Avoid using any liquid cleaners, solvents, or abrasive materials.
User questions about DFE-570TX D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual DFE-570TX - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFE-570TX by D-LINK.
USER MANUAL DFE-570TX D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DFE-570TX
Category : Network card