DFE-690TXD - Network card D-LINK - Free user manual and instructions
Find the device manual for free DFE-690TXD D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Interface Card |
| Brand | D-Link |
| Model | DFE-690TXD |
| Interface | PCI |
| Data Transfer Rate | 10/100 Mbps (Fast Ethernet) |
| Connector Type | RJ-45 |
| Standards | IEEE 802.3, IEEE 802.3u |
| Bus Type | PCI |
| Dimensions | 120 x 60 x 20 mm |
| Weight | 50 g |
| Power Consumption | 2 W (from PCI bus) |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Link/Activity, Speed |
| Compatible Operating Systems | Windows 98/ME/2000/XP, Linux |
| Features | Auto-negotiation, Full-duplex support, Wake-on-LAN |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Keep away from water; do not disassemble |
| Spare Parts | Not applicable (integrated circuit) |
| Repairability | Not user-serviceable; replace if faulty |
Frequently Asked Questions - DFE-690TXD D-LINK
What is the D-Link DFE-690TXD?
The D-Link DFE-690TXD is a Fast Ethernet PCI network interface card that allows a desktop computer to connect to a 10/100 Mbps Ethernet network.
Is the DFE-690TXD compatible with Windows 10?
The DFE-690TXD was designed for older operating systems like Windows 98/ME/2000/XP. It may not have official drivers for Windows 10, but generic PCI Ethernet drivers might work. Check D-Link's support page for updated drivers.
What is the maximum data transfer speed?
The maximum data transfer speed is 100 Mbps (Fast Ethernet) in full-duplex mode, with auto-negotiation to 10 Mbps if needed.
Does the DFE-690TXD support full-duplex?
Yes, it supports full-duplex operation, allowing simultaneous sending and receiving of data for improved network performance.
How do I install the drivers for the DFE-690TXD?
Insert the installation CD that came with the card, or download drivers from D-Link's website. Run the setup and follow on-screen instructions. The card should be detected automatically.
Can I use the DFE-690TXD with a laptop?
The DFE-690TXD is a PCI card designed for desktop computers. It is not compatible with laptops unless the laptop has a PCI slot (rare). For laptops, use a USB Ethernet adapter instead.
What do the LED indicators on the DFE-690TXD mean?
The Link/Activity LED lights up when a network connection is established and blinks during data activity. The Speed LED indicates 100 Mbps (on) or 10 Mbps (off).
Is the DFE-690TXD compatible with Linux?
Yes, the DFE-690TXD is compatible with Linux using the 8139too or r8169 kernel modules. Most modern distributions will automatically detect and configure the card.
Does the DFE-690TXD support Wake-on-LAN?
Yes, it supports Wake-on-LAN (WoL). You must enable it in the card's properties or BIOS settings to allow the computer to be turned on remotely via a magic packet.
How do I clean the DFE-690TXD network card?
To clean, power off the computer and remove the card. Use a soft, dry cloth to gently wipe the connectors and circuit board. Avoid liquids or abrasive cleaners.
User questions about DFE-690TXD D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual DFE-690TXD - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFE-690TXD by D-LINK.
USER MANUAL DFE-690TXD D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DFE-690TXD
Category : Network card