DES-3528P - Network switch D-LINK - Free user manual and instructions
Find the device manual for free DES-3528P D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed L2+ Network Switch |
| Brand | D-Link |
| Model | DES-3528P |
| Ports | 24 x 10/100/1000 Mbps PoE+ ports + 4 x Combo SFP slots |
| PoE Standard | IEEE 802.3af / 802.3at |
| PoE Budget | 370 W |
| Switching Capacity | 56 Gbps |
| MAC Address Table | 16,384 entries |
| Management | Web UI, CLI, SNMP, Telnet, SSH |
| Dimensions (W x D x H) | 440 x 250 x 44 mm |
| Weight | 3.5 kg |
| Power Supply | AC 100–240 V, 50–60 Hz |
| Max Power Consumption | 450 W |
| Operating Temperature | 0 °C to 50 °C |
| Operating Humidity | 10% to 90% non-condensing |
| Mounting | 19-inch rack mountable, 1U |
| Security Features | Access Control Lists (ACL), 802.1X, storm control |
| LED Indicators | Power, per-port Link/Activity, PoE status |
| Cooling | Dual variable-speed fans |
| Included Accessories | Power cord, console cable, rack mount kit |
| Cleaning | Disconnect power; wipe with dry cloth; avoid abrasive cleaners |
| Repairability | No user-serviceable parts; contact D-Link support for replacements |
Frequently Asked Questions - DES-3528P D-LINK
How do I reset the DES-3528P switch to factory defaults?
To restore the factory configuration, press and hold the reset button on the front panel for about 10 seconds until the power LED flashes. Alternatively, use the CLI command reset config after logging in.
What is the PoE power budget and does it support PoE+?
The DES-3528P provides a total PoE budget of 370 watts across 24 ports. It supports both IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards, delivering up to 30W per port for high-demand devices.
Can I manage the switch through a web browser?
Yes, the switch includes an embedded web server. Connect to its IP address using HTTP or HTTPS, and you can configure VLANs, QoS, security, and firmware updates via an intuitive GUI.
Does this switch support stacking?
Yes, the DES-3528P can be stacked with up to 9 units using optional 10 GbE stack modules. Stacking enables centralized management and expanded port capacity under a single IP address.
What is the default IP address for initial access?
The default management IP address is 10.90.90.90. Since the switch has no factory DHCP client, you may need to set your PC to the same subnet to access the web interface.
How to update the firmware?
Download the latest firmware file from D-Link support site. In the web UI, go to System > Firmware Upgrade, select the file, and click Upgrade. Do not power off the device during the process.
How many VLANs can be configured?
The switch supports up to 4096 VLAN groups, following IEEE 802.1Q tagging. This allows flexible network segmentation for enterprises.
What are the environmental operating limits?
The switch operates in temperatures from 0°C to 50°C and humidity from 10% to 90% non-condensing. Ensure proper ventilation in the rack or equipment room.
What is included in the box?
The package includes the DES-3528P switch, a power cord, a console cable, rack-mount brackets with screws, and rubber feet. Optional SFP modules are sold separately.
Is there a warranty and how to get support?
D-Link typically offers a limited lifetime warranty for this model, but terms vary by region. Contact D-Link technical support or visit their website for warranty details and service options.
User questions about DES-3528P D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual DES-3528P - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DES-3528P by D-LINK.