VP-8x8AK - Video switch Kramer - Free user manual and instructions
Find the device manual for free VP-8x8AK Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Matrix Switcher 8x8 |
| Number of Inputs | 8 video and 8 stereo audio inputs |
| Number of Outputs | 8 video and 8 stereo audio outputs |
| Video Signal Type | Composite video (CVBS) |
| Audio Signal Type | Analog stereo, balanced or unbalanced |
| Video Bandwidth | 100 MHz @ -3 dB |
| Audio Bandwidth | 20 Hz to 20 kHz |
| Control Methods | Front panel, RS-232, IR remote (optional) |
| Switching Modes | Audio-follow-video or breakaway |
| Dimensions (W x H x D) | 19.0" x 3.5" x 10.0" (482 x 89 x 254 mm) |
| Weight | 2.8 kg (6.2 lbs) approximately |
| Power Source | 100-240 V AC, 50/60 Hz, 15 VA |
| Rack Mountable | Yes, 2U height, brackets included |
| LED Indication | Power, input and output status per channel |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid solvents |
| Safety Precautions | Use in a well-ventilated area; disable power before cleaning |
| Spare Parts | Standard power cable and rack-mount screws are available |
| Repairability | Servicing by qualified technician recommended |
| Accessories Included | Power cord, rack-mount kit, installation guide |
Frequently Asked Questions - VP-8x8AK Kramer
How do I connect video sources to the VP-8x8AK?
Connect video sources to the 8 input BNC connectors and audio sources to the corresponding input terminal blocks or RCA jacks. Use high-quality cables to ensure optimal performance.
Can I switch audio and video independently?
Yes, the VP-8x8AK supports both audio-follow-video and breakaway switching modes, allowing you to route video and audio separately when needed.
How do I control the switcher over RS-232?
Connect the switcher to your computer via the RS-232 port and use the compatible Kramer control software or send simple serial commands. The default parameters are 9600 baud, 8 data bits, no parity, 1 stop bit.
What do the front panel LEDs indicate?
The LEDs show the selected input for each output and confirm active routing. A lit LED indicates the current connection state.
Does the device support component or HD video?
The VP-8x8AK is designed for composite video. For component or HD signals, consider a different Kramer matrix switcher with appropriate bandwidth.
How do I set audio-follow-video mode?
Press the AFV button on the front panel, or use the RS-232 command. In AFV mode, each output follows the selected input for both video and audio.
What kinds of audio connections are supported?
Balanced audio inputs/outputs are available on terminal blocks, and unbalanced connections can be made via RCA jacks. Always use the appropriate cabling.
What is the maximum cable length recommended for video?
For composite video, keep cable runs under 100 meters with RG-59 cable to maintain signal quality.
How should I clean the unit?
Disconnect power, then gently wipe the housing with a dry microfiber cloth. Do not use liquid cleaners or abrasive pads.
Can I mount the switcher in a standard rack?
Yes, it occupies 2U of rack space and includes mounting brackets for standard 19-inch racks.
User questions about VP-8x8AK Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video switch in PDF format for free! Find your manual VP-8x8AK - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VP-8x8AK by Kramer.
USER MANUAL VP-8x8AK Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : VP-8x8AK
Category : Video switch