Outrigger Jr. - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free Outrigger Jr. INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | Infinity |
| Model | Outrigger Jr. |
| Category | Loudspeaker |
| Speaker Configuration | 2-way |
| Woofer Size | 5.25 inches (approx.) |
| Tweeter Size | 0.75 inch dome |
| Frequency Response | 65 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 87 dB (2.83V/1m) |
| Power Handling | 75 watts RMS |
| Recommended Amplifier Power | 10-100 watts per channel |
| Crossover Frequency | 3 kHz |
| Enclosure Type | Bass reflex (ported) |
| Cabinet Material | MDF with black vinyl finish |
| Dimensions (H x W x D) | 11 x 7 x 8 inches (approx.) |
| Weight | 5.5 lbs each |
| Connectivity | Wired binding posts |
| Placement | Bookshelf or speaker stand |
| Grille | Removable cloth grille |
| Maintenance | Wipe cabinet with a soft, dry cloth |
| Safety | Place on a stable surface to avoid tipping |
| Repairs | Refer to a qualified technician |
Frequently Asked Questions - Outrigger Jr. INFINITY
How do I connect the Infinity Outrigger Jr. to my amplifier?
Use standard speaker wire. Connect the positive terminal (+) on the speaker to the positive output on the amplifier, and the negative terminal (-) to the negative output. Ensure a secure connection with binding posts.
What is the recommended placement for best sound quality?
Place the speakers at ear level when seated, ideally 6-8 feet apart and at least 8 inches from the rear wall. Angle them slightly toward the listening position for optimal stereo imaging.
Can I use these speakers with a subwoofer?
Yes, the Outrigger Jr. can be used as front or rear speakers in a home theater setup. Set your receiver to small crossover mode and choose a crossover frequency around 80 Hz to integrate with a subwoofer.
How do I clean the speaker grille?
Remove the grille gently and vacuum it with a soft brush attachment, or wipe with a damp cloth. Do not use harsh chemicals on the cabinet or drivers.
Why is there no sound from the speakers?
Check that the amplifier is on, the correct source is selected, and the speaker wires are firmly connected. Ensure the impedance matches your amplifier's specs and that the volume is turned up.
What is the impedance of the Outrigger Jr.?
The nominal impedance is 8 ohms, which is compatible with most home stereo and AV receivers.
Can I use these speakers outdoors?
The Outrigger Jr. is designed for indoor use only. Exposure to moisture and extreme temperatures can damage the cabinet and drivers.
How do I break in new speakers?
Play music at moderate volume for 20-30 hours. This allows the suspension and driver materials to loosen up and achieve full sound quality.
What amplifier power is recommended?
Use an amplifier or receiver rated between 10 and 100 watts per channel into 8 ohms. Avoid severe clipping to protect the speakers.
How do I remove the grille for cleaning?
Gently pry the grille off from the edges using your fingers or a plastic tool. It is held by pegs or friction; do not force it to avoid damage.
User questions about Outrigger Jr. INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Outrigger Jr. - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Outrigger Jr. by INFINITY.
USER MANUAL Outrigger Jr. INFINITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFINITY
Model : Outrigger Jr.
Category : Loudspeaker