Reference REF-9632ix - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free Reference REF-9632ix INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive loudspeaker |
| Brand | Infinity |
| Model | Reference REF-9632ix |
| Enclosure Type | Bass reflex (ported) |
| Speaker Configuration | 2-way |
| Woofer Size | 165 mm (6.5 inch) |
| Tweeter Size | 25 mm (1 inch) |
| Frequency Response | 40 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 89 dB @ 2.83V/1m |
| Recommended Amplifier Power | 20 - 150 watts RMS |
| Dimensions (H x W x D) | 320 x 200 x 250 mm |
| Weight | 5.2 kg (11.5 lbs) |
| Connectivity | Wired binding posts |
| Placement | Bookshelf or speaker stands |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Keep away from moisture and heat |
| Repairability | Contact qualified service personnel |
| Included Accessories | User manual, rubber feet |
| General Information | High-fidelity sound reproduction |
Frequently Asked Questions - Reference REF-9632ix INFINITY
How do I connect the Infinity Reference REF-9632ix to my amplifier?
Connect the speaker wires from your amplifier's positive and negative terminals to the corresponding binding posts on the back of the speaker. Ensure a secure connection and maintain correct polarity for proper audio reproduction.
What is the recommended placement for these speakers?
Place speakers on stable bookshelves or stands, at ear level when listening. Keep them away from walls (at least 20 cm) to avoid excessive bass boost and ensure a clear soundstage.
Can I use these speakers outdoors or in humid environments?
No, these speakers are designed for indoor use only. Exposure to moisture or extreme weather can damage the drivers and cabinet. Keep them in a dry, temperature-controlled room.
How do I clean the speaker cabinets?
Use a soft, dry cloth to wipe the cabinet surfaces. Avoid abrasive cleaners, solvents, or water, which may damage the finish or affect the drivers.
What power rating should my amplifier have?
An amplifier with 20–150 watts RMS per channel is recommended. This ensures enough headroom for clean sound without risking damage from excessive clipping.
Can I use these speakers with a surround sound system?
Yes, the REF-9632ix can be used as front, rear, or surround speakers in a home theater setup. Ensure they are matched with an appropriate center channel and subwoofer for best results.
What is the difference between bi-wiring and standard wiring?
Bi-wiring uses separate cables for the woofer and tweeter sections, while standard wiring uses a single pair of cables. These speakers support standard wiring; bi-wiring may offer slight improvement but is not required.
How do I care for the speaker grilles?
Gently remove the grilles for cleaning and wipe them with a dry, soft brush or cloth. Avoid pulling the grille fabric to prevent tearing. Replace them securely after cleaning.
Can I place the speakers on a shelf or do they need stands?
They are designed for flexible placement, but for optimal performance, use dedicated stands or bookshelf placement at ear level. Isolate them from surfaces to reduce vibrations.
What should I do if a speaker produces no sound?
First, check the amplifier and connections: ensure speaker wires are securely connected and not shorted. Verify the source is playing and the amplifier is set to the correct output. If the problem persists, test the speaker with another amplifier or contact service.
User questions about Reference REF-9632ix INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Reference REF-9632ix - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference REF-9632ix by INFINITY.