MS25 - Loudspeaker Memphis Audio - Free user manual and instructions
Find the device manual for free MS25 Memphis Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Way Coaxial Loudspeaker |
| Brand | Memphis Audio |
| Model | MS25 |
| Speaker Size | 5.25 inches (13 cm) |
| Nominal Impedance | 4 ohms |
| Power Handling (RMS) | 40 Watts |
| Peak Power Handling | 80 Watts |
| Frequency Response | 60 Hz - 20 kHz |
| Sensitivity | 90 dB ± 2 dB |
| Magnet Type | Ferrite |
| Tweeter Type | Polyurethane Dome |
| Cone Material | Polypropylene |
| Mounting Depth | 1.8 inches (46 mm) |
| Cutout Diameter | 4.6 inches (117 mm) |
| Dimensions (W x H x D) | 5.9 x 5.9 x 2.8 inches |
| Weight | 1.1 lb (0.5 kg) per speaker |
| Installation Type | Flush mount |
| Connection Type | Push terminals |
| Included Accessories | Grilles and mounting hardware |
| Maintenance and Cleaning | Wipe with soft dry cloth; avoid water and solvents |
| Safety Warning | Disconnect power source before installation |
| Spare Parts and Repairability | Contact authorized service center for original parts |
| General Information | Designed for car audio use in sealed enclosures |
Frequently Asked Questions - MS25 Memphis Audio
How do I connect the Memphis Audio MS25 speaker to my car stereo?
Connect the positive and negative wires to the matching push terminals. Ensure polarity is correct: positive to positive, negative to negative. Use 18-gauge wire for best results.
What amplifier power is recommended for the MS25?
The speaker handles 40 Watts RMS and 80 Watts peak. An amplifier delivering 10 to 60 Watts RMS per channel works well.
Can the MS25 be used outdoors or in a boat?
The MS25 is designed for indoor car installations. It is not waterproof, so avoid exposure to moisture unless protected.
How should I clean the MS25 speaker?
Use a soft dry cloth to remove dust. Never use liquids, solvents, or compressed air on the cone or tweeter.
What is the mounting depth of the MS25?
The mounting depth is 1.8 inches (46 mm). Make sure your door or dash has enough clearance.
Does the MS25 come with grilles?
Yes, the package includes grilles and mounting hardware for easy installation.
What is the impedance of the MS25?
The nominal impedance is 4 ohms, compatible with most car audio amplifiers and head units.
Can I connect the MS25 to a factory radio?
Yes, the 4-ohm impedance and high sensitivity (90 dB) allow it to work with a factory radio, though an external amp improves sound quality.
How long is the break-in period for new speakers?
Play music at moderate volume for approximately 10 to 15 hours. This softens the suspension and improves sound quality.
What size hole is needed to install the MS25?
The required cutout diameter is 4.6 inches (117 mm). Always measure before cutting.
User questions about MS25 Memphis Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual MS25 - Memphis Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MS25 by Memphis Audio.
USER MANUAL MS25 Memphis Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Memphis Audio
Model : MS25
Category : Loudspeaker