SRX572 - Loudspeaker Memphis Audio - Free user manual and instructions
Find the device manual for free SRX572 Memphis Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Loudspeaker |
| Brand | Memphis Audio |
| Model | SRX572 |
| Speaker Size | 5" x 7" (13 x 18 cm) |
| Design Type | 2-Way Coaxial Speaker |
| Impedance | 4 Ohms |
| Power Handling (RMS) | 50 Watts |
| Peak Power | 150 Watts |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 92 dB |
| Tweeter Size | 1" (25mm) Mylar Dome |
| Woofer Material | Polypropylene Cone |
| Surround Material | Rubber |
| Mounting Depth | 2" (50mm) |
| Cutout Dimensions | 5.5" x 7" (140 x 178 mm) |
| Weight (per speaker) | 0.8 kg (1.8 lbs) |
| Recommended Amplifier Power | 10-75 Watts RMS |
| Installation Type | Surface Mount or Flush Mount |
| Cleaning | Gently wipe with a dry microfiber cloth |
| Safety Warning | Ensure stereo is off during installation; avoid water exposure |
| Reparability | Repairable by authorized service center; replacement parts available |
| Spare Parts Availability | Tweeters, grilles, connectors |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - SRX572 Memphis Audio
What is the RMS power rating of the Memphis Audio SRX572?
The SRX572 handles 50 Watts RMS and 150 Watts peak, making it suitable for most factory and aftermarket head units.
Can these speakers be used with a factory stereo?
Yes, the SRX572 has a 4-ohm impedance and 92 dB sensitivity, so it works efficiently with factory stereos or external amplifiers.
What is the recommended amplifier power for the SRX572?
For best performance, use an amplifier delivering 10-75 Watts RMS per channel. Avoid exceeding the RMS rating to prevent distortion.
How do I install the SRX572 speakers?
Mount the speaker in a 5" x 7" opening with a 2" mounting depth. Connect the positive and negative terminals, then secure the speaker in place. Ensure the stereo is off during installation.
What should I do if the sound is distorted?
Check the amplifier gain and head unit volume. If distortion persists, verify that the speaker wires are not shorted and that the speaker is not blown. Reduce the bass boost if needed.
How do I clean the SRX572 speakers?
Gently wipe the speaker cone and grille with a dry microfiber cloth. Do not use water or cleaning solvents, as they may damage the materials.
What is the impedance of these speakers?
The SRX572 has a 4 Ohm impedance, which is standard for most car audio systems and compatible with factory wiring.
Are the tweeters detachable?
Yes, the 1" Mylar dome tweeter is designed to be detachable for separate mounting, allowing for better sound staging if desired.
What is the mounting depth of the SRX572?
The mounting depth is 2 inches (50 mm), which fits most standard 5" x 7" speaker locations without modification.
Do these speakers come with grilles?
Yes, the SRX572 includes protective grilles to shield the speaker from debris and damage while maintaining a clean appearance.
User questions about SRX572 Memphis Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SRX572 - Memphis Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SRX572 by Memphis Audio.
USER MANUAL SRX572 Memphis Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Memphis Audio
Model : SRX572
Category : Loudspeaker