BC360HT - Lawn mower Maruyama - Free user manual and instructions
Find the device manual for free BC360HT Maruyama in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Lawn mower / Brush cutter |
| Brand | Maruyama |
| Model | BC360HT |
| Engine Type | 2-stroke, air-cooled |
| Displacement | 36.3 cm³ |
| Power | 1.6 kW (2.1 hp) |
| Fuel Mixture | Gasoline mixed with 2-stroke oil (50:1) |
| Fuel Tank Capacity | 0.7 L |
| Cutting Line Diameter | 2.4 mm |
| Cutting Width | 450 mm |
| Shaft Type | Straight |
| Handle Type | Loop handle |
| Weight | 7.9 kg (without cutting attachment) |
| Anti-Vibration | Yes |
| Starting System | Recoil start |
| Ignition | Electronic (CDI) |
| Carburetor | Walbro-type diaphragm |
| Air Filter | Foam element |
| Safety Features | Safety trigger, stop switch, harness |
| Maintenance | Clean air filter, check spark plug, sharpen blade |
| Spare Parts Availability | Available through Maruyama dealers |
| Repairability | Modular design for easy component replacement |
Frequently Asked Questions - BC360HT Maruyama
What type of fuel does the Maruyama BC360HT use?
The BC360HT uses a mixture of gasoline and 2-stroke oil at a ratio of 50:1. This ensures proper lubrication and engine performance.
How do I start the BC360HT?
To start, place the switch in the ON position, press the primer bulb 5 times, and pull the recoil starter quickly. Ensure the cutting line is free from obstacles.
How do I replace the cutting line?
Turn the engine off and disconnect the spark plug boot. Remove the spool cover, take out the old line, and wind the new 2.4 mm trimmer line neatly. Align the lines with the exit holes and reassemble.
What is the recommended oil-to-gas ratio?
Use a 50:1 fuel mix (1 part 2-stroke oil to 50 parts gasoline). Always use a high-quality air-cooled 2-stroke oil.
How often should I clean the air filter?
Check the foam air filter every 25 operating hours. Clean with soapy water and dry before re-oiling with air filter oil.
What safety equipment should I wear?
Always wear eye protection, hearing protection, and sturdy footwear. Use the provided harness to distribute weight and keep both hands on the handle.
What is the engine displacement?
The BC360HT features a 36.3 cm³ two-stroke engine producing around 1.6 kW for heavy-duty cutting.
How do I store the brush cutter for winter?
Drain the fuel tank, run the carburetor empty, clean the unit, and store in a dry place. Remove the spark plug and add a teaspoon of oil into the cylinder before pulling the starter to coat the walls.
What spark plug does it use?
The recommended spark plug is typically a NGK CMR6A or equivalent. Check the manual for the correct gap setting, usually 0.6–0.7 mm.
Why won't my BC360HT start?
Check the fuel mixture, spark plug, and air filter. Ensure the switch is ON, the stop switch works, and the fuel line is not clogged. If necessary, replace the spark plug.
User questions about BC360HT Maruyama
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual BC360HT - Maruyama and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BC360HT by Maruyama.
USER MANUAL BC360HT Maruyama
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Maruyama
Model : BC360HT
Category : Lawn mower