BASSCUBE2.0 - Uncategorized PHOENIX GOLD - Free user manual and instructions
Find the device manual for free BASSCUBE2.0 PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Bass Restoration Processor |
| Model | BASSCUBE2.0 |
| Brand | Phoenix Gold |
| Primary Function | Restores and enhances low-frequency bass signals in car audio systems |
| Input Connections | 2-channel RCA line inputs |
| Output Connections | 2-channel RCA line outputs with bass restoration |
| Power Supply | 12V DC (vehicle electrical system) |
| Current Draw | Approximately 500 mA |
| Bass Boost Control | Adjustable bass boost up to 12 dB at selectable frequencies |
| Crossover | Built-in adjustable low-pass crossover |
| Phase Control | Selectable 0° or 180° phase switch |
| Frequency Response | 20 Hz – 200 Hz |
| Signal-to-Noise Ratio | Better than 90 dB |
| Input Sensitivity | Adjustable from 200 mV to 5 V |
| Dimensions (W x H x D) | 85 mm x 50 mm x 25 mm |
| Weight | 180 g |
| Installation | Wired in-line between head unit and amplifier or subwoofer |
| Maintenance | Clean the surface with a dry, soft cloth; keep connectors free of dust and moisture |
| Safety Precautions | Disconnect the vehicle battery before wiring to avoid short circuits or damage |
| Spare Parts and Repairability | No user-serviceable parts inside; contact a certified technician for repair |
| Warranty | Typical manufacturer warranty (see official documentation) |
| Compatibility | Works with most car stereo systems and amplifiers with RCA inputs |
Frequently Asked Questions - BASSCUBE2.0 PHOENIX GOLD
What is the purpose of the Phoenix Gold BASSCUBE2.0?
The BASSCUBE2.0 is designed to restore and enhance low-frequency bass that may be lost when using factory or low-level audio signals. It ensures your car audio system delivers deep, punchy bass.
How do I connect the BASSCUBE2.0?
Connect the RCA inputs to your head unit's line-level outputs (front or rear channels). Then connect the RCA outputs to your amplifier. If you're using a stock radio without RCA jacks, you'll need a line output converter.
Can I use this device with any car stereo?
Yes, the BASSCUBE2.0 is compatible with most aftermarket head units and even factory systems, provided you have a proper signal source. The adjustable input sensitivity helps match different output levels.
What is the 'bass boost' feature and how should I set it?
The bass boost adds up to 12 dB of gain at a selected frequency. Start with a low setting (around 0-3 dB) and gradually increase while listening for distortion. Adjust the frequency to match your subwoofer's response.
How do I set the crossover frequency?
Set the low-pass crossover to a frequency near your subwoofer's upper limit (typically 80-120 Hz). Lower frequencies for larger subs, higher for smaller ones. This prevents unwanted midrange frequencies from reaching the sub.
What does the phase switch do?
The phase switch reverses the polarity of the output signal (0° or 180°). Use it to align the subwoofer's output with the main speakers, especially if they are mounted far apart, for smoother bass response.
Do I need a separate power supply?
No, the device is powered by the vehicle's 12V DC system. Connect (usually red) to an accessory or battery positive and (black) to chassis ground, or use the remote turn-on lead from the head unit.
Why is there no audible difference after installation?
Check that the input sensitivity is correctly matched, the crossover and boost are not set too low, and the device is receiving power. Also verify RCA connections are secure and not reversed.
Can the BASSCUBE2.0 be used with an OEM (factory) radio?
Yes, but you need to convert the speaker-level output of the factory radio to line-level RCA using an external line output converter (L.O.C.) before connecting to this unit.
How do I clean and maintain the device?
Disconnect the device from power before cleaning. Wipe the exterior with a soft dry cloth. Avoid using water or solvents. Keep the connectors and controls free from dirt and moisture to ensure reliable performance.
User questions about BASSCUBE2.0 PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BASSCUBE2.0 - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BASSCUBE2.0 by PHOENIX GOLD.
USER MANUAL BASSCUBE2.0 PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : BASSCUBE2.0
Category : Uncategorized