ISW-621TS15 - Switch Planet - Free user manual and instructions
Find the device manual for free ISW-621TS15 Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Ethernet Switch |
| Model Number | ISW-621TS15 |
| Ports | 6 x 10/100/1000BASE-T RJ45 |
| Fiber Port | 1 x 100/1000BASE-X SFP slot |
| Switching Capacity | 14 Gbps |
| MAC Address Table | 8K entries |
| Power Input | DC 12-48V, redundant |
| Power Consumption | Max 12W |
| Operating Temperature | -40 to 75°C |
| Storage Temperature | -40 to 85°C |
| Humidity | 5% to 95% (non-condensing) |
| Housing | Aluminum, IP30 protection |
| Dimensions | 135 x 100 x 40 mm |
| Weight | 600 g |
| Mounting | DIN-rail or wall-mount |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3z |
| LED Indicators | Power, port link/activity, alarm |
| Safety | CE, RoHS compliant |
| Repairability | Modular SFP and power terminal block |
| Warranty | 5 years |
Frequently Asked Questions - ISW-621TS15 Planet
How do I connect the ISW-621TS15 to my network?
The ISW-621TS15 is a plug-and-play industrial switch. Connect your Ethernet cables to the 6 RJ45 ports, and insert any SFP module into the SFP slot if needed. Then power on the device. The switch immediately starts forwarding traffic with no configuration required.
What is the default IP address of the switch?
The ISW-621TS15 is an unmanaged switch, so it does not have an IP address. It operates at Layer 2 and forwards data frames based on MAC addresses. No network setup is required.
How can I mount the switch on a DIN rail?
The switch comes with a metal DIN-rail clip. Attach the clip to the back of the switch, then angle the top of the clip onto the rail and press down until it snaps into place. To remove it, pull down on the spring-loaded release tab.
What power supply should I use for the ISW-621TS15?
The switch supports a DC power input of 12 to 48 volts. It has a redundant power input with two terminal blocks. Connect a DC power source that matches the voltage range and has sufficient current capacity, typically at least 1A.
How do I check the link status using the LEDs?
Each port has two LEDs: one for link/activity and one for speed. The power LED indicates whether the switch is powered. The alarm LED lights up when a power failure or port failure is detected. Refer to the manual for a complete LED table.
Can I use the SFP port for long-distance fiber transmission?
Yes, the SFP port supports 100/1000BASE-X modules. Depending on the SFP module installed, you can achieve distances from 550 meters (multi-mode) up to 120 kilometers (single-mode). The switch also supports DDMI for digital diagnostics.
Is the switch suitable for outdoor installation?
The switch has an IP30-rated aluminum housing and is designed for industrial environments. However, it is not waterproof. For outdoor use, it must be placed in a weatherproof enclosure to protect it from moisture and dust.
How do I reset the switch to factory defaults?
This unmanaged switch does not store configuration settings, so there is nothing to reset. Simply power off and on again to restart it. If you need to restore a corrupted device state, cycle the power or use the hardware reset button if available.
Which SFP modules are compatible with the switch?
The switch accepts standard 100/1000BASE-X SFP modules that comply with MSA standards. Planet recommends using their own Gigabit SFP transceivers, such as the MGB-GT series, but third-party modules may also work if they support the same speed and wavelength.
What should I do if a copper port is not connecting?
First, check the cable type and length. Use a Cat5e or Cat6 cable up to 100 meters. Verify that the connected device is powered on. Inspect the Ethernet cable for damage. Try a different port on the switch. If the LED is off, the switch may not detect a valid link.
User questions about ISW-621TS15 Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ISW-621TS15 - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ISW-621TS15 by Planet.
USER MANUAL ISW-621TS15 Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : ISW-621TS15
Category : Switch