IGS-604HPT-RJ - Switch Planet - Free user manual and instructions
Find the device manual for free IGS-604HPT-RJ Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Gigabit PoE+ Ethernet Switch |
| Ports | 4 x 10/100/1000BASE-T PoE+ ports, 2 x 1000BASE-X SFP slots |
| PoE Standard | IEEE 802.3af/at (PoE+) |
| PoE Power Budget | Up to 120 W total for PoE ports |
| Switching Capacity | 12 Gbps |
| Forwarding Rate | 8.93 Mpps |
| MAC Address Table | 8K entries |
| Jumbo Frame | 9 KB |
| Input Power | 12 - 48 VDC via redundant terminal block |
| Power Consumption | 9.5 W with no PoE load / up to 129.5 W with full PoE load |
| Dimensions (W x D x H) | 135 x 100 x 60 mm |
| Weight | 0.75 kg |
| Mounting | DIN-rail and wall-mount |
| Enclosure | IP30 industrial metal housing |
| Operating Temperature | -40 to 75°C |
| Operating Humidity | 5% to 95% non-condensing |
| Maintenance and Cleaning | Disconnect power before cleaning; wipe housing with a soft dry cloth |
| Safety | Use only approved power supply; observe voltage polarity and environmental ratings |
| Spare Parts and Repairability | No user-replaceable parts; repairs should be performed by qualified service personnel |
| General Information | Refer to the official user manual for installation and configuration details |
Frequently Asked Questions - IGS-604HPT-RJ Planet
What kind of device is the Planet IGS-604HPT-RJ?
It is an industrial Gigabit PoE+ Ethernet switch with 4 copper PoE+ ports and 2 SFP fiber slots, designed for network deployments in harsh environments.
How many ports does the IGS-604HPT-RJ have?
The switch offers 4 x 10/100/1000BASE-T PoE+ ports for powered devices and 2 x 1000BASE-X SFP slots for fiber uplinks.
What PoE standard is supported and what is the power budget?
It supports IEEE 802.3af/at (PoE+) with a total PoE power budget of up to 120 W, allowing each port to deliver up to 30 W.
What power source should be used with this switch?
Use a DC power source rated at 12 - 48 VDC connected through the dual-input redundant terminal block, following the polarity marks on the housing.
Can the switch be installed in a server rack?
The IGS-604HPT-RJ is an industrial DIN-rail mount switch, but its compact metal housing also supports wall mounting. It is not designed for standard 19-inch rack installation.
What are the environmental operating limits?
The switch operates reliably from -40 to 75°C with 5% to 95% non-condensing humidity, making it suitable for factory floors and outdoor cabinets.
Does the switch support fiber optic connections?
Yes, the two 1000BASE-X SFP slots accept fiber transceivers for long-distance gigabit uplinks, while the four copper ports handle PoE+ powered devices.
How should the switch be cleaned and maintained?
Disconnect power before cleaning, then wipe the IP30 metal housing with a soft, dry cloth. Avoid liquids and compressed air containing moisture.
What safety precautions should be observed?
Always use an approved 12-48 VDC power supply, never open the housing, verify polarity, and install the switch in a protected area away from flammable materials.
Are spare parts available for the IGS-604HPT-RJ?
There are no user-serviceable internal parts. If repair is needed, contact qualified service personnel or your Planet dealer for approved replacement units.
User questions about IGS-604HPT-RJ Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual IGS-604HPT-RJ - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGS-604HPT-RJ by Planet.
USER MANUAL IGS-604HPT-RJ Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : IGS-604HPT-RJ
Category : Switch