AutoDome VG5-164 - Security Camera BOSCH - Free user manual and instructions
Find the device manual for free AutoDome VG5-164 BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (PTZ Dome) |
| Brand | Bosch |
| Model | AutoDome VG5-164 |
| Image Sensor | 1/4-inch ExView HAD CCD |
| Resolution | 480 TVL (color) / 570 TVL (B/W) |
| Lens | 3.4 - 122.4 mm, 36x optical zoom |
| Pan Angle | 360 degrees continuous |
| Tilt Angle | -90 to +90 degrees |
| Day/Night Mode | Automatic switching with IR-cut filter |
| Minimum Illumination | 0.25 Lux (color), 0.003 Lux (B/W) |
| Housing Material | Aluminum with polycarbonate dome |
| Ingress Protection | IP66 (outdoor rated) |
| Power Supply | 24 VAC |
| Power Consumption | 30 W (approx.) |
| Dimensions | 180 mm diameter x 210 mm height |
| Weight | 2.1 kg |
| Operating Temperature | -40 to +50 degrees Celsius |
| Video Output | Composite, BNC x2 |
| Control Interface | RS-485, Pelco D/P protocol |
| Main Functions | Motion detection, privacy zones, alarm inputs/outputs |
| Cleaning and Maintenance | Clean dome with soft lint-free cloth and mild detergent |
| Safety/Security | Password protected menu, auto flip, pan/tilt lock |
| Spare Parts and Repairability | Replacement dome, motors, PCB assemblies available |
| General Information | Suitable for indoor/outdoor surveillance |
Frequently Asked Questions - AutoDome VG5-164 BOSCH
How do I reset the AutoDome VG5-164 to factory defaults?
Power off the camera, set the address and baud rate switches to the factory default positions, then power on. Alternatively, use the OSD menu and select Factory Reset. Consult the manual for exact switch settings.
What protocols are supported for control?
The camera supports RS-485 control with Pelco D and Pelco P protocols. Set the protocol via DIP switches or the OSD menu.
How do I clean the dome bubble?
Use a soft, lint-free cloth slightly dampened with water or a mild soap solution. Avoid abrasive cleaners or solvents, and ensure the camera is powered off during cleaning.
Can the camera be mounted outdoors?
Yes, the AutoDome VG5-164 has an IP66-rated housing, making it suitable for outdoor installation. Ensure all cables are properly sealed against moisture.
What is the maximum zoom and focus range?
It features a 36x optical zoom with focal length from 3.4 mm to 122.4 mm. Digital zoom may also be available for extended magnification.
How do I set up motion detection?
Access the OSD menu and navigate to Motion Detection. You can define zones and sensitivity levels for each zone. Alarm outputs can be triggered.
What are the default network settings?
This model is typically an analog camera without built-in IP networking. It outputs composite video via BNC, and control is via RS-485. Use a video encoder for IP streaming.
Why is the image not clear at night?
Check that the day/night mode is set to Auto. The camera switches to black-and-white mode and uses the IR-cut filter to enhance low light performance. Also ensure the lens and dome are clean.
How do I perform a pan/tilt calibration?
Through the OSD menu, select Calibration and choose Auto Calibration. The camera will automatically re-center and align its pan/tilt mechanism.
Are spare parts available for this model?
Yes, Bosch provides spare parts such as the dome cover, motors, and PCB assemblies. Contact an authorized Bosch service center for replacements.
User questions about AutoDome VG5-164 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual AutoDome VG5-164 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AutoDome VG5-164 by BOSCH.