NTE-3503-F02L - Security Camera BOSCH - Free user manual and instructions
Find the device manual for free NTE-3503-F02L BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Bosch |
| Model | NTE-3503-F02L |
| Image Sensor | 5MP CMOS |
| Resolution | 5 Megapixels (2560x1920) |
| Lens | 2.8mm Fixed |
| Field of View | Horizontal: 100°, Vertical: 75° |
| Minimum Illumination | 0.05 lux (color), 0.001 lux (B/W) |
| Video Compression | H.265, H.264, MJPEG |
| Frame Rate | 30 fps at 5MP |
| Network Interface | 10/100 Base-T Ethernet, RJ45 |
| Power Supply | PoE (IEEE 802.3af) |
| Power Consumption | 7W typical |
| Dimensions (WxHxD) | 70 x 55 x 130 mm |
| Weight | 0.35 kg |
| Operating Temperature | -20°C to 50°C |
| Housing Rating | IP66 |
| Night Vision | Yes, up to 30m IR |
| Audio | Built-in microphone, audio out |
| Storage | MicroSD up to 256GB, NAS |
| Protocols | IPv4, IPv6, ONVIF, RTSP, HTTPS |
| Security Features | HTTPS encryption, IP filter, password protection |
| Mounting | Wall, ceiling (bracket included) |
| Warranty | 3 years limited |
Frequently Asked Questions - NTE-3503-F02L BOSCH
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds. The device will reboot and restore factory settings.
What is the default IP address and how can I find it?
The default IP is 192.168.1.168. Use the Bosch Configuration Manager software or check your router's DHCP client list to locate it.
How do I connect the camera to my network?
Connect the camera to a PoE switch or injector via Ethernet cable. The camera will obtain an IP address automatically via DHCP. Then use Bosch software or web browser to access it.
Is the camera weatherproof? Can I use it outdoors?
Yes, the camera has an IP66 rating, meaning it is dust-tight and protected against powerful water jets. It is suitable for outdoor use.
How do I update the firmware?
Download the latest firmware from Bosch's support website. Log into the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during upgrade.
What is the maximum SD card capacity supported?
The camera supports microSD cards up to 256GB (Class 10 or UHS-I).
Format the card in the camera's menu before use.
Format the card in the camera's menu before use.
How can I clean the camera lens?
Use a soft, dry microfiber cloth. If needed, slightly dampen the cloth with water or a lens cleaning solution. Avoid abrasive cleaners or touching the lens directly with fingers.
Can I view the camera remotely on my smartphone?
Yes, download the Bosch Remote Viewer app (or compatible VMS). Ensure the camera is connected to the internet and port forwarding is configured on your router for remote access.
What type of PoE does the camera support?
The camera supports IEEE 802.3af Power over Ethernet, which provides up to 15.4W. A standard PoE switch or injector will work.
How do I set up motion detection?
Log into the camera's web interface, go to Alarm > Motion Detection. Enable it and draw detection zones. Adjust sensitivity and trigger settings as needed.
User questions about NTE-3503-F02L BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual NTE-3503-F02L - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NTE-3503-F02L by BOSCH.
USER MANUAL NTE-3503-F02L BOSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSCH
Model : NTE-3503-F02L
Category : Security Camera