PNW-57 - Loudspeaker AudioControl - Free user manual and instructions
Find the device manual for free PNW-57 AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive loudspeaker |
| Speaker Configuration | 2-way indoor/outdoor speaker |
| Woofer Size | 5.25 inches |
| Tweeter Size | 1 inch |
| Frequency Response | 60 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 90 dB |
| Power Handling | 80 watts RMS, 120 watts peak |
| Recommended Amplifier Power | 20 - 120 watts RMS per channel |
| Enclosure Material | Weather-resistant ABS plastic |
| Grille Material | Powder-coated aluminum |
| Mounting Options | Wall-mountable bracket included |
| Installation | Indoor or outdoor use |
| Dimensions (H x W x D) | 300 x 180 x 200 mm |
| Weight | 2.5 kg each |
| Connection Type | Spring-loaded 5-way binding posts |
| Removable Grille | Yes |
| Weatherproof Rating | IP54 |
| Color | Black |
| Cleaning | Wipe with a soft dry cloth; avoid water ingress |
| Safety | Do not place near heat sources; ensure secure mounting |
| Spare Parts | Replacement drivers and grilles available from AudioControl |
Frequently Asked Questions - PNW-57 AudioControl
How do I connect the PNW-57 speaker to my amplifier?
Use a standard speaker wire with up to 12-gauge thickness. Strip 1/2 inch of insulation, insert into the spring-loaded terminals, and release. Make sure to match positive to positive and negative to negative.
Can I install this speaker outdoors?
Yes, the PNW-57 is designed for indoor and outdoor use with an IP54 weather-resistant rating. Mount it under an overhang for best protection from direct water exposure.
What gauge speaker wire should I use?
For runs under 50 feet, 16-gauge wire is sufficient. For longer distances, use 14-gauge or 12-gauge to minimize signal loss.
How do I clean the speaker?
Gently wipe the grille and cabinet with a soft, dry microfiber cloth. Do not use water or solvents, and never spray liquid directly on the speaker.
Can I use two PNW-57 speakers for stereo sound?
Absolutely. Connect both speakers to the left and right channels of your amplifier, keeping consistent polarity for proper stereo imaging.
What amplifier power is recommended?
The speaker handles up to 80 watts RMS per channel. An amplifier delivering 20-120 watts RMS per channel is ideal, as it provides adequate headroom without overdriving.
Why is my speaker producing weak bass?
Check the speaker placement: corners and walls reinforce bass. Also verify that your amplifier's tone controls and crossover settings are not filtering out low frequencies.
What should I do if I hear distortion?
Reduce amplifier volume or gain. Distortion often occurs when an amplifier is clipping. Also check speaker wire connections for loose strands that may cause intermittent contact.
Does the speaker include wall-mounting hardware?
Yes, each speaker comes with a keyhole mount and a swivel bracket. The package includes screws and anchors suitable for most wall surfaces.
What is AudioControl's warranty on this product?
AudioControl offers a limited 3-year warranty covering defects in materials and workmanship. Keep your receipt for proof of purchase.
User questions about PNW-57 AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PNW-57 - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PNW-57 by AudioControl.
USER MANUAL PNW-57 AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : PNW-57
Category : Loudspeaker