PNW-69CS2 - Loudspeaker AudioControl - Free user manual and instructions
Find the device manual for free PNW-69CS2 AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-way component loudspeaker system |
| Speaker Size | 6" x 9" |
| Woofer Cone Material | Polypropylene with rubber surround |
| Tweeter Type | 1" silk dome tweeter |
| Power Handling (RMS) | 60 watts |
| Power Handling (Peak) | 180 watts |
| Impedance | 4 ohms |
| Sensitivity | 90 dB |
| Frequency Response | 45 Hz - 22 kHz |
| Mounting Depth | 3.2 inches |
| Cutout Dimensions | 5.8" x 8.7" |
| Recommended Amplifier Power | 20 - 100 watts RMS per channel |
| Weight (per pair) | 3.5 lbs |
| Includes | Grilles and mounting hardware |
| Installation Location | Car doors or rear deck |
| Purpose | Car audio sound reproduction |
| Maintenance | Clean with a soft, dry cloth |
| Safety | Ensure impedance and power ratings match your amplifier |
| Repairability | Replaceable tweeter and accessible internal components |
| General Information | High-quality audio with low distortion and wide dispersion |
Frequently Asked Questions - PNW-69CS2 AudioControl
What is a component speaker system?
A component speaker system separates the woofer, tweeter, and crossover into individual units. This allows for better sound staging and flexible installation compared to coaxial speakers.
How do I install the PNW-69CS2 speakers?
Mount the woofer in the door or rear deck using the provided mounting hardware. Install the tweeter in a suitable location at ear level. Connect the crossover to both drivers and ensure the polarity matches the amplifier output.
What amplifier power is recommended?
For the best performance, use an amplifier delivering between 20 and 100 watts RMS per channel. This range provides clean power without risking damage to the speakers.
Can I use these speakers without an external amplifier?
Yes, they can operate with a head unit's built-in amplifier, but an external amplifier is recommended to fully exploit their sound quality and dynamic range.
What is the frequency range of this speaker?
The PNW-69CS2 reproduces frequencies from 45 Hz to 22 kHz, covering deep bass and airy treble for a balanced sound.
How do I break in new speakers?
During the first 10-15 hours of use, play music at moderate volume to allow the suspension to loosen. This improves bass response and overall accuracy.
Can these speakers be used in a home audio system?
While designed for car audio, they can be used in a home setup if mounted in a suitable baffle or enclosure and connected to a compatible amplifier.
How should I clean and maintain the speakers?
Use a soft, dry cloth to wipe the speaker cones and grilles. Avoid abrasive cleaners or moisture, as they can damage the cone material and corrode connections.
What is the impedance of this speaker?
The impedance is 4 ohms, which is standard for car audio. Ensure your amplifier is stable at this impedance to prevent overheating.
Are replacement parts available?
Yes, the tweeter and wiring harnesses are replaceable. Contact AudioControl support for parts and service to extend the life of your speakers.
User questions about PNW-69CS2 AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PNW-69CS2 - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PNW-69CS2 by AudioControl.
USER MANUAL PNW-69CS2 AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : PNW-69CS2
Category : Loudspeaker