DCM60R - Measurement Sanwa - Free user manual and instructions
Find the device manual for free DCM60R Sanwa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Clamp Meter |
| Model | DCM60R |
| Brand | Sanwa |
| Measurement Category | CAT III 600V |
| AC Current Range | 0.01A to 60.00A |
| DC Current Range | 0.01A to 60.00A |
| AC/DC Voltage Range | 0.1mV to 600V |
| Resistance Range | 0.1Ω to 40MΩ |
| Capacitance Range | 1nF to 4000µF |
| Frequency Range | 10Hz to 1MHz |
| Display | LCD, 4000 counts |
| Clamp Opening | 25mm (approx. 1 inch) |
| Power Supply | 2 x AAA batteries |
| Dimensions | 218 x 62 x 35 mm |
| Weight | 200g (including batteries) |
| Safety Certifications | IEC 61010, CE |
| Overrange Indication | Display shows "OL" |
| Low Battery Indication | Battery symbol on LCD |
| Auto Power Off | After 15 minutes of inactivity |
| Data Hold | Freezes reading on display |
| Backlight | For low-light environments |
| Operating/Storage Temperature | 0°C to 50°C / -20°C to 60°C |
| Included Accessories | Test leads, batteries, carrying case, manual |
| Maintenance and Cleaning | Wipe with dry cloth; do not use solvents |
| Repairability | Replaceable batteries; professional service for repairs |
Frequently Asked Questions - DCM60R Sanwa
How do I measure AC current using the DCM60R?
Turn the dial to the AC current position, open the clamp, and enclose a single conductor. Read the value on the display. Ensure the conductor is centered in the clamp for accurate readings.
What is the maximum voltage that can be measured?
The DCM60R can measure up to 600V AC/DC in compliance with CAT III safety standards.
How do I replace the batteries?
Turn off the meter, remove the battery cover, replace the two AAA batteries, and reattach the cover. Always observe polarity.
Can the DCM60R measure DC current?
Yes, it measures DC current as well as AC current, up to 60A. Select the DC current mode and allow the reading to stabilize.
What does "OL" indicate on the display?
"OL" stands for overload, meaning the input exceeds the selected range or the meter's maximum capacity. Switch to a higher range if available.
Is the DCM60R safe for industrial use?
The meter is rated CAT III 600V and complies with IEC 61010, making it suitable for industrial electrical measurements within its specified limits.
How do I use the data hold function?
Press the DATA HOLD button to freeze the current reading on the LCD. Press again to release. Useful for capturing fluctuating measurements.
Can I measure capacitance with this meter?
Yes, the DCM60R includes a capacitance measurement function with a range from 1nF to 4000µF. Discharge capacitors before testing.
What maintenance does the DCM60R require?
Regularly inspect the test leads, clean the enclosure with a dry cloth, and remove batteries if stored for extended periods. Do not use solvents.
Does the DCM60R have an auto power off feature?
Yes, it automatically powers off after 15 minutes of inactivity to conserve battery life. Press any button to wake it up.
User questions about DCM60R Sanwa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual DCM60R - Sanwa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCM60R by Sanwa.
USER MANUAL DCM60R Sanwa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sanwa
Model : DCM60R
Category : Measurement