ADC284Y - Uncategorized HAGER - Free user manual and instructions
Find the device manual for free ADC284Y HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Protection Device |
| Brand | Hager |
| Model | ADC284Y |
| Rated Voltage | 230 V AC |
| Rated Current | 63 A |
| Number of Poles | 4 Poles |
| Mounting Type | DIN Rail Mounting |
| Width in Module Units | 4 Modules (70 mm) |
| Dimensions (W x H x D) | 70 mm x 90 mm x 60 mm |
| Weight | 0.25 kg |
| Degree of Protection | IP20 |
| Rated Breaking Capacity | 6 kA |
| Tripping Characteristics | Type C |
| Operating Temperature | -25°C to +60°C |
| Terminal Capacity | 1 mm² to 25 mm² |
| Frequency | 50/60 Hz |
| Standards | IEC 60898 |
| Care and Cleaning | Wipe with a dry cloth; not waterproof |
| Safety | Disconnect power before installation or servicing |
| Spare Parts and Repairability | Replaceable modular parts; contact Hager support |
Frequently Asked Questions - ADC284Y HAGER
What is the Hager ADC284Y?
The Hager ADC284Y is a modular electrical protection device designed for residential and commercial installations. It provides reliable overcurrent and short-circuit protection.
What tools are needed for installation?
Installation requires a standard slotted or Phillips screwdriver for terminal connections and a DIN rail mounting tool for secure placement. Always use insulated tools for safety.
Can the ADC284Y be used for solar applications?
Yes, the ADC284Y is suitable for DC and AC applications, but ensure the voltage and current ratings match your solar system's specifications. Consult an electrician for proper selection.
How do I reset the device after a trip?
To reset the ADC284Y, first disconnect the load, then simply push the switch to the ON position. If it trips again immediately, there may be a fault that requires investigation.
What type of circuit breaker is this?
The Hager ADC284Y is a miniature circuit breaker (MCB) with Type C tripping characteristics, typically used for protecting circuits with moderate inrush currents.
Is the ADC284Y suitable for residential use?
Absolutely. This device is ideal for home distribution boards, providing dependable protection for lighting, sockets, and appliance circuits.
How do I connect the terminals?
Loosen the terminal screws, insert the stripped wire into the terminal, and tighten the screw to the specified torque (around 2-3 Nm). Ensure the wire is held firmly.
What regular maintenance is required?
Minimal maintenance is required. Periodically check for dust or moisture and ensure the device operates at ambient temperatures within the specified range. No internal cleaning is needed.
What do I do if the device trips frequently?
Frequent tripping indicates an overload or short circuit. Reduce the connected load, check for damaged wiring, and test the circuit. If the issue persists, consult a qualified electrician.
Where can I find the manual?
The user manual is available for free download on the notice-facile.com website. You can also request a translated version by selecting your language and providing your email.
User questions about ADC284Y HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ADC284Y - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADC284Y by HAGER.
USER MANUAL ADC284Y HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : ADC284Y
Category : Uncategorized