VF318PZD - Uncategorized HAGER - Free user manual and instructions
Find the device manual for free VF318PZD HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Distribution Board / Consumer Unit |
| Brand | Hager |
| Model Number | VF318PZD |
| Number of Modules | 18 |
| Protection Rating | IP65 (dust-tight and protected against low-pressure water jets) |
| Enclosure Material | High-impact thermoplastic, halogen-free |
| Mounting Type | Surface-mounting (wall-mounted) |
| Door Type | Removable hinged door with lockable handle |
| Rated Voltage | 230/400 V AC, 50/60 Hz |
| Rated Current | Up to 125 A incoming, 32 A per outgoing circuit |
| Busbar Rating | 125 A |
| Dimensions (H × W × D) | 470 × 330 × 155 mm |
| Weight | 2.8 kg |
| Compatibility | Hager modular (18 mm) devices such as MCBs, RCDs, and RCBOs |
| Cable Entry | Knockouts at top, bottom, and rear |
| Number of Rows | 1 |
| Neutral and Earth Bars | Included with double neutral and earth terminals |
| Main Functions | Houses and protects up to 18 modular protection devices for electrical distribution |
| Maintenance and Cleaning | Wipe with a soft, dry cloth; do not use water, solvents, or abrasive cleaners |
| Safety | Double-insulated Class II, finger-protection, IP65-rated against moisture |
| Standards | IEC 61439-2, EN 62208 |
| Spare Parts and Repairability | Replacement doors, locks, busbars, and terminal covers available |
Frequently Asked Questions - VF318PZD HAGER
What is the Hager VF318PZD used for?
The Hager VF318PZD is a distribution board used to safely enclose and protect circuit breakers and other modular protection devices in residential and light commercial installations.
How many modules can I fit in the VF318PZD?
It accommodates up to 18 modules of standard 18 mm wide devices, allowing a mix of MCBs, RCDs, and RCBOs.
What is the IP rating of the VF318PZD?
The enclosure has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets from all directions. Suitable for outdoor or damp environments.
Is the VF318PZD compatible with existing Hager devices?
Yes, it is designed for Hager modular devices with a standard 18 mm pitch, including MCBs, RCDs, and RCBOs from the same manufacturer.
Does the VF318PZD come with busbars?
Yes, it includes pre-installed neutral and earth busbars for fast and easy installation of outgoing circuits.
Can I install a main switch and RCD together?
Yes, the 18-module capacity allows you to install a main isolator and multiple RCDs to create a split-load board for better protection.
What are the dimensions and weight of the board?
The approximate dimensions are 470 mm high by 330 mm wide by 155 mm deep and it weighs about 2.8 kg. See the technical datasheet for exact measurements.
How should I clean and maintain the VF318PZD?
Wipe the enclosure with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners as they may damage the thermoplastic or compromise the IP seal.
Is the enclosure safe to use in wet areas?
With an IP65 rating and double-insulated Class II design, it is safe for use in damp locations, such as outdoor kiosks or farm buildings, provided all glands are properly sealed.
Are spare parts available for the VF318PZD?
Yes, Hager offers replacement parts such as lockable doors, hinges, busbar sets, and terminal covers to extend the life of the board.
User questions about VF318PZD HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VF318PZD - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VF318PZD by HAGER.
USER MANUAL VF318PZD HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : VF318PZD
Category : Uncategorized