WaterWatch - Detector T&S - Free user manual and instructions
Find the device manual for free WaterWatch T&S in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water leak detector |
| Brand | T&S |
| Model | WaterWatch |
| Category | Detector |
| Primary Function | Detects water leaks and alerts with audible alarm |
| Detection Technology | Contact sensor that triggers on moisture |
| Power Supply | 2x AA batteries (not included) |
| Battery Life | Up to 12 months under normal use |
| Alarm Sound Level | 85 dB at 3 feet |
| LED Indicator | Yes, red LED when alarm is triggered |
| Placement | On floors or near appliances where leaks may occur |
| Dimensions | Approx. 70 x 70 x 25 mm |
| Weight | 100 g (without batteries) |
| Operating Temperature | 0°C to 50°C |
| Humidity Resistance | Splash resistant (IPX4 rating) |
| Material | ABS plastic |
| Color | White |
| Warranty | 2 years |
| Box Contents | Detector, mounting clips, user manual |
| Maintenance | Wipe exterior with a soft dry cloth |
| Safety | For indoor use only |
Frequently Asked Questions - WaterWatch T&S
How do I install the WaterWatch detector?
Place the detector on a flat surface or mount it with the included clips near potential leak sources like water heaters, washing machines, or under sinks. Ensure the sensors face downward and are exposed.
What batteries does the WaterWatch require?
The detector uses 2x AA batteries (not included). Open the battery compartment on the back, insert the batteries according to polarity, and close the cover securely.
How do I test if the detector is working?
Press the test button on the side. If the alarm sounds and the LED flashes, the detector is functional. We recommend testing monthly.
What triggers the alarm?
The contact sensors on the bottom detect water. When moisture bridges the contacts, the unit emits a loud 85 dB alarm and a red LED lights up.
Can the WaterWatch detect slow leaks?
Yes, it can detect slow drips as long as they reach the sensor area. For best results, place it directly under pipes or fittings.
Is the WaterWatch waterproof?
The housing is splash resistant (IPX4), but it is not designed to be submerged. Keep the detector dry when not in use.
How long do the batteries last?
Under normal standby conditions, the batteries can last up to 12 months. Replace them immediately when the low-battery indicator appears.
What does the flashing LED mean?
A slow flashing green LED indicates normal operation. A steady red LED means a leak is detected. A fast flashing red LED with a beep indicates low battery.
How do I clean the sensor?
Wipe the sensor area with a soft dry cloth. Do not use water or cleaning chemicals, as they may cause false alarms or damage.
What should I do if the alarm goes off?
Check for leaks around the detector. Once the sensor is dry and the issue is resolved, the alarm will stop automatically. If it doesn't, remove the batteries and reinsert them to reset.
User questions about WaterWatch T&S
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual WaterWatch - T&S and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WaterWatch by T&S.
USER MANUAL WaterWatch T&S
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : T&S
Model : WaterWatch
Category : Detector