SCA-H-VER33-2000 - Heating Scarlett - Free user manual and instructions
Find the device manual for free SCA-H-VER33-2000 Scarlett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Scarlett |
| Model | SCA-H-VER33-2000 |
| Product Type | Electric Fan Heater |
| Power Source | AC 220-240V ~ 50Hz |
| Rated Power | 2000 W |
| Heat Settings | 2 levels (low/high) |
| Fan Speeds | 1 adjustable fan speed |
| Thermostat | Adjustable thermostat with temperature control |
| Heating Element | PTC ceramic heating element |
| Safety Features | Overheat protection, tip-over switch |
| Control Type | Rotary dial for power and thermostat |
| Indoor Use | Designed for household indoor use |
| Color | White/Black (typical) |
| Dimensions (approx.) | 17 x 13 x 25 cm (W x D x H) |
| Weight (approx.) | 1.5 kg |
| Cord Length | 1.8 m |
| Heating Coverage | Up to 25 m² (depending on insulation) |
| Noise Level | ≤ 40 dB |
| Maintenance | Clean with a soft dry cloth; do not immerse in water |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - SCA-H-VER33-2000 Scarlett
What is the recommended room size for the Scarlett SCA-H-VER33-2000?
The heater is suitable for rooms up to approximately 25 m². For best results, ensure adequate insulation and avoid using it in very large open spaces.
Can I leave the heater on overnight?
It is not recommended to leave any electric heater unattended overnight. Always switch off and unplug the heater when you are asleep or away from home. The heater includes overheat protection and a tip-over switch for added safety.
How do I clean the fan heater?
Before cleaning, disconnect the heater from the power supply and let it cool down. Wipe the outside with a soft, damp cloth. Do not use harsh detergents or submerge the device in water. Clean the air inlet and outlet with a vacuum cleaner to remove dust.
What safety features does the heater have?
The heater is equipped with overheat protection, which automatically shuts off the device if the internal temperature exceeds a safe level, and a tip-over switch that cuts power if the heater is accidentally knocked over.
Why does the heater switch off automatically after some time?
If the heater turns off by itself, it may be due to overheating or a tip-over event. Check the air vents for blockages and ensure the heater is on a stable, flat surface. Allow it to cool down before restarting.
Does the heater have an adjustable thermostat?
Yes, the adjustable thermostat lets you set your desired temperature. When the room temperature reaches that level, the heating element will switch off temporarily, and it will cycle back on when the temperature drops.
Can I use this heater in a bathroom?
This heater is intended for dry indoor areas only. It does not have IP protection against moisture, so do not use it in bathrooms, shower rooms, or near water sources.
How many heating levels are available?
The heater has two power settings: low (1,000 W) and high (2,000 W). Use the high setting for rapid heating and the low setting for more economical operation.
What is the power consumption of the heater?
On the maximum setting, the heater consumes 2,000 W. When the thermostat is active, the element cycles on and off, so the average consumption is lower depending on the room temperature.
Is the heater noisy during operation?
The fan creates a moderate airflow sound, but the noise level is kept below 40 dB for quiet operation, making it suitable for use in bedrooms or offices.
User questions about SCA-H-VER33-2000 Scarlett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual SCA-H-VER33-2000 - Scarlett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCA-H-VER33-2000 by Scarlett.