SA-450N - Receiver Soundtrack - Free user manual and instructions
Find the device manual for free SA-450N Soundtrack in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Stereo receiver |
| Brand | Soundtrack |
| Model | SA-450N |
| Dimensions (W x H x D) | 430 x 130 x 320 mm |
| Weight | 5.4 kg |
| Power supply | 220-240V ~ 50/60Hz |
| Power consumption | 180 W |
| Output power | 2 x 50 W RMS |
| Speaker impedance | 4-8 ohms |
| Frequency response | 20 Hz - 20 kHz |
| Signal-to-noise ratio | 85 dB |
| Radio tuner | FM/AM stereo with 30 station presets |
| Audio inputs | 3x stereo RCA, 1x phono (MM) |
| Audio outputs | 2x speaker terminals, headphone jack, record out |
| Controls | Volume, bass, treble, balance, input selector, tuner buttons |
| Construction | Steel chassis with aluminum front panel |
| Available colors | Black or silver front panel |
| Maintenance | Clean with a soft, dry cloth and avoid solvents |
| Safety warnings | Disconnect power before cleaning and keep ventilation slots unobstructed |
| Spare parts | Available through authorized Soundtrack service centers |
| General | Designed for home stereo audio; manual available for free download in PDF |
Frequently Asked Questions - SA-450N Soundtrack
How do I connect my Soundtrack SA-450N receiver to a CD player?
Use an RCA cable. Connect the left and right outputs of the CD player to any of the three stereo RCA audio inputs on the receiver, then press the corresponding input selector on the front panel.
What speaker impedance should I use with the SA-450N?
The receiver is designed for speakers with an impedance between 4 and 8 ohms. Check your speaker specifications before connecting them.
Can I listen with headphones?
Yes, plug your headphones into the standard 6.35 mm headphone jack on the front panel. The connected speakers are muted when headphones are inserted.
How do I clean the receiver?
Unplug the device, then wipe the exterior with a soft, dry, lint-free cloth. Do not use alcohol, ammonia, or abrasive cleaners.
What should I do if the receiver does not turn on?
First check that the power cord is firmly plugged into a working outlet. Then verify the main power switch on the rear panel is on. If it still does not power up, contact an authorized Soundtrack service center.
Can I use Bluetooth or stream music to this receiver?
The SA-450N is an analog stereo receiver without built-in Bluetooth. You can connect a Bluetooth audio adapter to one of the RCA inputs to stream music wirelessly.
How do I set and recall FM radio presets?
Tune to the desired station, press the Memory button, then press one of the preset number buttons. To recall a preset, press the same preset button while in tuner mode.
How many speakers can I connect to the SA-450N?
It supports two pairs of speakers (A and B) with switching between them, or a single pair. Each pair must have a nominal impedance above 4 ohms, and the total load should not exceed the receiver's designed impedance range.
Is a remote control included?
The SA-450N is designed primarily for direct control on the front panel; however, some units may have a remote input. Refer to the manual for your specific version.
How do I download the instruction manual for free?
On the notice-facile.com page for the Soundtrack SA-450N, click the download button to get the PDF manual. No registration is required.
User questions about SA-450N Soundtrack
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual SA-450N - Soundtrack and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SA-450N by Soundtrack.
USER MANUAL SA-450N Soundtrack
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Soundtrack
Model : SA-450N
Category : Receiver