MM-1401 - Receiver Soundtrack - Free user manual and instructions
Find the device manual for free MM-1401 Soundtrack in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Soundtrack |
| Model | MM-1401 |
| Dimensions (W x H x D) | 430 x 130 x 350 mm (approx.) |
| Weight | 7.5 kg (approx.) |
| Power Supply | AC 230V, 50Hz |
| Power Consumption | 200W max |
| Output Power | 2 x 100W RMS (8 ohms) |
| Frequency Range (FM) | 87.5 - 108 MHz |
| Frequency Range (AM) | 530 - 1600 kHz |
| Audio Inputs | 4 x RCA line in, 1 x Phono |
| Speaker Impedance | 8 - 16 ohms |
| Tone Controls | Bass and Treble |
| Remote Control | Included |
| Main Functions | FM/AM tuner, amplifier, source selector, volume and balance control |
| Maintenance and Cleaning | Wipe with a soft dry cloth; do not use solvents or water |
| Safety Instructions | Do not expose to moisture; keep ventilation slots clear; do not cover |
| Spare Parts and Repairability | Contact authorized service center for genuine replacement parts |
| Manual Language | English |
Frequently Asked Questions - MM-1401 Soundtrack
How do I connect speakers to the MM-1401?
Connect the positive and negative speaker wires to the corresponding terminals on the rear panel. Ensure the impedance is between 8 and 16 ohms. Use banana plugs or bare wire for optimal contact.
How do I tune in radio stations?
Press the FM/AM selector to choose a band, then use the Tuning knob or seek buttons to scan. To save a preset, press the memory button and select a station number.
What is the power output of the receiver?
The receiver delivers 2 x 100W RMS at 8 ohms, providing sufficient power for most home speakers. Peak power may be higher.
Can I connect a turntable to the MM-1401?
Yes, the receiver has a dedicated Phono input compatible with moving magnet cartridges. If your turntable has a built-in phono preamp, use a standard line input instead.
How should I clean and maintain the receiver?
Always unplug the unit before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid water, solvents, and abrasive cleaners. Do not allow dust to accumulate in ventilation slots.
Is a remote control included and can I get a replacement?
A remote control is included with the MM-1401. If you need a replacement, contact Soundtrack support with your model number and the remote code printed on the original remote.
Why is there no sound from my speakers?
Check that the speaker wires are securely connected at both ends and that the speaker selector switch is set to the correct pair. Also verify the source input is selected and the volume is turned up, not muted.
Can I use this receiver for home theater?
The MM-1401 is a stereo receiver, designed for two-channel audio. It does not support surround sound decoding, but you can connect it to a TV or media player to enjoy regular stereo playback.
What are the dimensions and weight of the device?
The receiver measures approximately 430 x 130 x 350 mm (W x H x D) and weighs about 7.5 kg. Always allow at least 10 cm of clearance around the unit for ventilation.
Where can I find the full user manual?
You can download the complete PDF manual for the MM-1401 on notice-facile.com by clicking the download button on this page. The manual includes installation, setup, and troubleshooting instructions.
User questions about MM-1401 Soundtrack
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MM-1401 - Soundtrack and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MM-1401 by Soundtrack.