Noise Engineering

Kith Ruina - Synthesizer Noise Engineering - Free user manual and instructions

Find the device manual for free Kith Ruina Noise Engineering in PDF.

📄 3 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Noise Engineering Kith Ruina - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Eurorack synthesizer module (distortion/effect)
Brand Noise Engineering
Model Kith Ruina
Module Width 6 HP
Depth 28 mm (approx.)
Weight 90 g (approx.)
Power Supply Eurorack +12V / -12V via 10-pin ribbon cable
Current Draw +12V: 40 mA, -12V: 20 mA
Main Function Dual-channel distortion/waveshaper with independent controls
Audio Inputs 2 x 3.5 mm mono jacks
Audio Outputs 2 x 3.5 mm mono jacks
CV Inputs 2 x 3.5 mm jacks for external control of Drive and Level
Controls Drive, Level, and Tone per channel
Construction Aluminum faceplate, high-quality PCB
Operating Temperature 0°C to 40°C
Storage Temperature -20°C to 60°C
Maintenance & Cleaning Wipe with a dry, lint-free cloth; avoid liquids and solvents
Safety Connect only in a powered-down system; reverse polarity protection built-in
Spare Parts & Repairability No user-serviceable parts; contact support for repairs
Warranty 1 year limited warranty
General Information Designed in California, USA; suitable for studio and live performance

Frequently Asked Questions - Kith Ruina Noise Engineering

What is the Noise Engineering Kith Ruina?
It is a dual-channel distortion and waveshaper module designed for Eurorack modular synthesizers, offering gritty, aggressive distortion with independent control over Drive, Level, and Tone.
How do I power the Kith Ruina?
Connect the included 10-pin ribbon cable to your Eurorack power bus, ensuring the red stripe is aligned with the -12V pin on both the module and the busboard. Double-check polarity before powering up.
Is the Kith Ruina stereo?
No, it is dual mono. It has two independent identical channels, each with its own input and output, allowing you to process two separate signals simultaneously.
Can I use the Kith Ruina with guitar or other line-level devices?
Yes, but you may need to adjust the input level. The module expects Eurorack modular levels (typically 10Vpp), so use a preamp or attenuator to bring guitar signals up to that range for optimal effect.
Does the Kith Ruina have CV control inputs?
Yes, it has two CV inputs—one for controlling the Drive and one for the Level. These accept voltages typically in the range of -5V to +5V, allowing dynamic modulation.
What is the current draw of the Kith Ruina?
The module draws approximately +12V: 40 mA and -12V: 20 mA. Ensure your power supply has sufficient headroom to handle this.
How should I clean the Kith Ruina?
Use a dry, lint-free cloth to wipe the faceplate and jacks. Do not use water, solvents, or abrasive cleaners, as they may damage the finish or electronic components.
Can the Kith Ruina be used as a guitar pedal?
It is not designed for direct guitar pedal use, as it expects modular-level signals and uses 3.5mm jacks. You could route a guitar through a preamp and then into the module, but it is not a standalone pedal.
What jacks and cables does the Kith Ruina use?
It uses standard 3.5mm mono jacks for audio and CV inputs/outputs. Use high-quality patch cables specifically for Eurorack systems.
Is the Kith Ruina able to produce clean tones, or is it always distorted?
It is primarily a distortion module, but with the Drive control set to minimum and Tone set to neutral, it can pass a relatively clean signal at low levels, though some coloration is expected. For fully clean amplification, consider a dedicated linear VCA.

User questions about Kith Ruina Noise Engineering

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Synthesizer in PDF format for free! Find your manual Kith Ruina - Noise Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Kith Ruina by Noise Engineering.

USER MANUAL Kith Ruina Noise Engineering

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Noise Engineering

Model : Kith Ruina

Category : Synthesizer