Bin Seq - Synthesizer Noise Engineering - Free user manual and instructions
Find the device manual for free Bin Seq Noise Engineering in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Sequencer Module |
| Brand | Noise Engineering |
| Model | Bin Seq |
| Width | 6 HP |
| Depth | 35 mm |
| Power Consumption | +12V: 60 mA, -12V: 10 mA |
| Power Connection | 10-pin ribbon cable (Eurorack standard) |
| Inputs | Clock, Reset, CV (3.5mm jacks) |
| Outputs | Gate, CV (3.5mm jacks) |
| Sequence Length | 16 steps |
| Sequence Modes | Forward, Reverse, Pendulum, Random |
| Voltage Range | 0-10V (CV output) |
| Controls | Knobs: 8 (per step), Switches: mode select |
| Indicators | LEDs for active step and gate |
| Construction | PCB, aluminum front panel |
| Weight | 90 g |
| Operating Temperature | 0°C to 50°C |
| Cleaning | Dry cloth; avoid liquids |
| Safety | Do not expose to moisture; disconnect power before installation |
| Warranty | 2 years limited |
| Repairability | Module is not user-serviceable; contact manufacturer for repairs |
| Included Accessories | Power ribbon cable, mounting screws |
Frequently Asked Questions - Bin Seq Noise Engineering
What is the Bin Seq and what does it do?
The Bin Seq is a Eurorack sequencer module from Noise Engineering. It generates control voltage (CV) and gate sequences for controlling synthesizer parameters.
How many steps does the Bin Seq have?
It has 16 steps that can be programmed individually using the front panel knobs.
Can I change the sequence direction?
Yes, the Bin Seq supports multiple playback modes: Forward, Reverse, Pendulum (alternating), and Random.
What voltage does the CV output produce?
The CV output has a range of 0 to 10V, compatible with most Eurorack modules.
How do I connect the Bin Seq to my system?
Use a 10-pin ribbon cable to connect to the Eurorack power bus. Ensure correct orientation (red stripe to -12V).
Does the Bin Seq have a reset input?
Yes, there is a Reset input (3.5mm jack) to restart the sequence to step 1 when a gate is received.
What is the power consumption of the Bin Seq?
It draws approximately 60 mA on +12V and 10 mA on -12V.
Can I chain multiple Bin Seq modules?
No, the Bin Seq does not have a dedicated chain link output. However, you can use a clock multiplier or external reset to synchronize multiple sequencers.
How do I clean the Bin Seq?
Use a soft dry cloth. Avoid liquids and abrasive cleaners to prevent damage to the panel and circuitry.
What should I do if the module doesn't power on?
Check the power cable orientation and ensure the module is securely connected. Verify that your Eurorack case provides adequate power. If issues persist, contact Noise Engineering support.
User questions about Bin Seq Noise Engineering
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Bin Seq - Noise Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bin Seq by Noise Engineering.
USER MANUAL Bin Seq Noise Engineering
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Noise Engineering
Model : Bin Seq
Category : Synthesizer