ACT1680 - Range hood ASPES - Free user manual and instructions
Find the device manual for free ACT1680 ASPES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Aspes |
| Model | ACT1680 |
| Mounting Type | Wall-mounted |
| Material | Stainless steel and glass |
| Number of Speeds | 3 |
| Maximum Extraction Capacity | 650 m3/h |
| Noise Level | 55 dB at maximum speed |
| Lighting | 2 x 1.5 W LED |
| Grease Filter | Washable aluminium mesh filter |
| Charcoal Filter | Optional, for recirculation mode |
| Air Evacuation | 150 mm diameter duct |
| Control Type | Electronic push buttons |
| Width | 600 mm |
| Depth | 500 mm |
| Height | 800 mm with telescopic chimney |
| Weight | 12 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Total Power Consumption | 150 W |
| Safety Features | Thermal cut-off protection |
| Maintenance | Clean metal filters weekly; wipe housing with damp cloth |
| Spare Parts Availability | Spare filters and LEDs available from the manufacturer or service centre |
| Repairability | Modular components, replaceable motor and switch |
| Certifications | CE compliant |
| Manual | Free PDF manual available for download |
Frequently Asked Questions - ACT1680 ASPES
How do I install the Aspes ACT1680 range hood?
The ACT1680 should be mounted on a wall at a minimum height of 650 mm above an electric hob, or 750 mm above a gas hob. Provide a 150 mm duct to the outside for extraction. If you want recirculation, install the charcoal filter before mounting.
How do I clean the grease filters?
Remove the aluminium mesh filters by releasing the locking clip and pulling them out. Wash them in warm soapy water or in the dishwasher at a low temperature. Dry them completely before refitting.
How often should I replace the charcoal filter?
In recirculation mode, replace the charcoal filter every 3 to 6 months to keep the odour removal efficiency. The exact frequency depends on how often you cook.
Why is the hood not removing odours effectively?
Check if the aluminium filters are dirty and if the charcoal filter is saturated. Also verify that the duct is not blocked and that the speed selected is appropriate for your cooking.
How do I control the LED lights?
Press the light button on the control panel to switch the LED lamps on and off. The 1.5 W LED lamps provide lighting over the cooking surface and have a long life.
What is the best speed for different cooking needs?
Use speed 1 for simmering and low heat, speed 2 for normal cooking, and speed 3 for strong frying, grilling, or when there are strong odours and smoke.
Can the ACT1680 be used in ductless mode?
Yes. Fit the charcoal filter and direct the exhaust vent back into the kitchen through the top outlet. The hood will then recirculate the air.
What safety features does the hood have?
The motor has a thermal cut-off switch, which stops the motor if it overheats. Check the grease filter and vent to prevent excessive build-up and ensure safe operation.
What should I do if the hood is very noisy?
Make sure the duct is not crushed, the filters are clean, and that the hood is properly installed without vibration. A high noise level may also mean a foreign object is stuck in the fan.
How can I get a replacement motor or control switch?
Spare parts such as motors and switches can be ordered from Aspes service centres. Provide the model number ACT1680 and the part number from the manual. The modular design makes replacement easy.
User questions about ACT1680 ASPES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ACT1680 - ASPES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACT1680 by ASPES.