DTB-133 - Receiver DENVER - Free user manual and instructions
Find the device manual for free DTB-133 DENVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Terrestrial Receiver (DVB-T2) |
| Brand | DENVER |
| Model Number | DTB-133 |
| Power Supply | 5V DC, 1A |
| Power Consumption | Approx. 5W |
| Dimensions (W x H x D) | 110mm x 30mm x 75mm |
| Weight | Approx. 150g |
| Tuner | DVB-T/T2, MPEG-2/4 H.264 |
| Video Output | HDMI, Composite (CVBS) |
| Audio Output | HDMI, Coaxial |
| USB Port | 1x USB 2.0 for multimedia playback |
| Supported Video Formats | AVI, MKV, MP4, TS, VOB |
| Supported Audio Formats | MP3, AAC, WMA |
| Remote Control | Infrared remote included |
| Antenna Input | 75 ohm coaxial (IEC) |
| Operating Temperature | 0°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Maintenance | Clean with a soft dry cloth; do not use liquids |
| Safety | Keep away from water and heat sources |
| Spare Parts & Repairability | No user-serviceable parts; refer to qualified service |
| Additional Features | Electronic Program Guide (EPG), Time Shift, Easy channel sorting |
Frequently Asked Questions - DTB-133 DENVER
How do I scan for TV channels on the DENVER DTB-133?
Go to the Menu, select Installation or Channel Search, then choose Auto Scan. Make sure the antenna is properly connected before starting the scan.
Why is there no signal on my DTB-133?
Check that the antenna cable is securely connected to the RF IN port. Ensure you have selected the correct source on your TV (HDMI or AV). Also, verify that you are in a good reception area.
How do I connect the receiver to my TV?
Use an HDMI cable to connect the receiver's HDMI port to your TV. For older TVs, you can use the composite cables (yellow, white, red) and select the corresponding AV input on the TV.
Can I record TV programs with this device?
The DTB-133 does not have a built-in recording feature, but it supports time shift on some broadcasts if a USB memory stick is connected. Check the manual for compatibility.
Why doesn't the remote control work?
First, replace the batteries in the remote. Make sure there are no obstacles between the remote and the receiver, and that you are pointing at the IR sensor on the front panel.
How do I update the firmware?
DENVER may release firmware updates via USB. Download the update file from the official website, copy it to a USB stick, then connect it to the receiver and follow the Firmware Update option in the menu.
What video formats can I play via USB?
The DTB-133 supports common formats like AVI, MKV, MP4, TS, VOB for video and MP3, AAC, WMA for audio. For best compatibility, avoid exotic codecs.
Is the receiver compatible with DVB-T2?
Yes, the Denver DTB-133 is a DVB-T2 receiver, meaning it can receive both DVB-T and DVB-T2 broadcasts, including HD channels.
How do I reset the receiver to factory settings?
Go to Menu > Settings > Factory Default. Confirm the reset. This will erase all channels and restore original settings.
Can I use this receiver with a satellite dish?
No, the DTB-133 is designed for terrestrial broadcasts only. It connects to a standard TV antenna, not a satellite dish.
User questions about DTB-133 DENVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DTB-133 - DENVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTB-133 by DENVER.
USER MANUAL DTB-133 DENVER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DENVER
Model : DTB-133
Category : Receiver