SAROS ICS8T-B-T-EACH - Subwoofer Crestron - Free user manual and instructions
Find the device manual for free SAROS ICS8T-B-T-EACH Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling subwoofer |
| Brand | Crestron |
| Model | SAROS ICS8T-B-T-EACH |
| Driver Size | 8" (203 mm) long-throw woofer |
| Frequency Response | 28 Hz - 120 Hz (±3 dB) |
| Power Handling | 120 W continuous, 240 W program |
| Impedance | 8 ohms (bypass), 25/70/100V transformer taps |
| Transformer Taps | 60 W, 30 W, 15 W, 7.5 W, 3.75 W |
| Sensitivity | 85 dB (1 W/1 m) |
| Mounting Type | Ceiling mount, with recessed grille |
| Dimensions (Diameter x Depth) | 285 mm x 240 mm |
| Cutout Size | 250 mm diameter |
| Weight | 4.5 kg |
| Construction | Steel back can, polypropylene cone |
| Grille Material | Powder-coated perforated steel, paintable white |
| Installation Hardware | C-ring and tile bridge included |
| Safety Rating | UL 2043 plenum-rated |
| Compliance | RoHS, CE, MIL-STD |
| Usage | Distributed audio systems, commercial installations |
| Maintenance | Wipe with dry cloth; no solvents |
| Warranty | 5-year Crestron warranty |
| Repairability | Replaceable driver and grille |
Frequently Asked Questions - SAROS ICS8T-B-T-EACH Crestron
What is the difference between the 70V transformer taps and the 8 ohm bypass?
The SAROS ICS8T-B-T-EACH includes a 70V/100V transformer for distributed audio systems, allowing multiple speakers on a single amplifier channel. Set the tap selector to the desired wattage (60W, 30W, 15W, etc.) to match the system's power budget. For low-impedance operation, set the selector to 8 ohm bypass to directly connect to a conventional amplifier.
Can I paint the grille to match my ceiling?
Yes, the grille is constructed from perforated steel and is factory-primeable. Use any standard latex or oil-based paint. Remove the grille before painting, and ensure the perforations remain open by using a thin coat or painting from the rear side.
What ceiling cutout size is required?
The speaker requires a 250 mm (9.84 in) diameter cutout. It fits into ceiling thicknesses from 5 mm to 25 mm. Use the included C-ring and tile bridge for secure drywall or drop ceiling tile installation.
Is the subwoofer suitable for plenum rated spaces?
Yes, the back can is UL 2043 rated, making it compliant for installation in plenum air handling spaces where fire safety and smoke emission standards are required.
What amplifier power is recommended?
We recommend an amplifier delivering 150-240 W per channel into 8 ohms. In 70V mode, use a transformer tap that corresponds to about 10-20% headroom above the total continuous power requirement. For example, a 30W tap works well with a 30-40W amplifier allocation.
How should I position an in-ceiling subwoofer for best bass response?
For distributed bass, place the subwoofer near a corner or along a wall boundary to reinforce low frequencies. Avoid centering in the room. In dual subwoofer installations, place them on opposite sides of the room to minimize standing wave nulls.
Can this subwoofer be used outdoors?
The SAROS ICS8T-B-T-EACH is designed for indoor installations only. It is not rated for outdoor exposure. For outdoor applications, select a weatherproof Crestron speaker model.
What is the frequency response, and how does it integrate with satellite speakers?
This subwoofer covers a frequency range of 28 Hz to 120 Hz (±3 dB). In a distributed audio system, set the satellite speakers to crossover around 80-100 Hz, allowing the subwoofer to handle the deep bass and reducing distortion in smaller speakers.
How do I set the transformer taps correctly?
Determine the total wattage required by summing the taps of all speakers on the same speaker line. Select the transformer tap that is closest to the desired power level, never exceeding the amplifier's output. For example, on a 100W amplifier channel, tap at 30W for each of three speakers.
What maintenance is required?
The speaker is basically maintenance-free. Periodically dust the grille and wipe the frame with a dry microfiber cloth. Do not use solvents or wet cloths. Check the tile ring and dog-ear clamps annually to ensure secure mounting.
User questions about SAROS ICS8T-B-T-EACH Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual SAROS ICS8T-B-T-EACH - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAROS ICS8T-B-T-EACH by Crestron.
USER MANUAL SAROS ICS8T-B-T-EACH Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : SAROS ICS8T-B-T-EACH
Category : Subwoofer