NXV-300 - Controller AMX - Free user manual and instructions
Find the device manual for free NXV-300 AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | AV Control Controller |
| Brand | AMX |
| Model | NXV-300 |
| Dimensions (W x H x D) | 17.4" x 1.7" x 5.2" (44.2 cm x 4.3 cm x 13.2 cm) |
| Weight | 3.5 lbs (1.6 kg) |
| Power Supply | 100-240V AC, 50/60Hz, external power adapter included |
| Power Consumption | 30W maximum |
| Processor | 32-bit ARM processor |
| Memory | 512 MB RAM, 4 GB Flash storage |
| Ethernet | 10/100/1000 Mbps LAN port |
| Serial Ports | 4x RS-232/422/485 ports |
| IR Ports | 4x IR output ports |
| I/O Ports | 8x digital input/output ports |
| Control Support | NetLinx code, ICSNet, HTTP proxy |
| Device Compatibility | Works with AMX Modero panels and AV devices |
| Main Functions | Centralized control of audiovisual equipment, automation scheduling, monitoring and notification |
| Mounting Options | Rack-mountable or tabletop |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% RH, non-condensing |
| Maintenance | Clean with dry cloth; ensure proper ventilation |
| Safety | Install away from heat sources; do not expose to water |
| Spare Parts | Replacement power adapters and mounting brackets available from AMX dealers |
| Repairability | Serviceable by certified AMX technicians |
Frequently Asked Questions - NXV-300 AMX
How do I perform a factory reset on the AMX NXV-300?
To perform a factory reset, power off the unit, press and hold the Reset button located on the rear panel, then power on while holding the button for 10 seconds. Release the button when the LED flashes. This restores the device to default settings.
How can I update the firmware on the NXV-300?
Download the latest firmware from the AMX website, then connect to the controller over Ethernet. Use the NetLinx Studio software or the web-based setup page to upload the firmware file. Ensure the device remains powered during the update.
What is the default IP address of the NXV-300?
The factory default IP address is 192.168.1.100 with a subnet mask of 255.255.255.0. You can change it via the serial console or the AMX Discovery utility.
How do I connect the NXV-300 to my network?
Connect an Ethernet cable from the LAN port on the controller to your network switch. The NXV-300 automatically negotiates speed and duplex. Use the AMX Discovery tool to locate the device on the network.
Can the NXV-300 control third-party devices?
Yes, the NXV-300 supports RS-232, IR, and Ethernet control, allowing integration with a wide range of third-party devices. You can write custom control modules using NetLinX code to communicate with any component that uses these protocols.
How do I mount the NXV-300 in a rack?
Use the included rack-mount brackets to attach the controller to a standard 19-inch rack. Align the brackets with the front or rear mounting holes, secure with screws, and ensure proper ventilation around the unit.
What types of cables are required for RS-232 communication?
For RS-232 connections, use a standard serial cable with DB9 connectors. The NXV-300 is DTE (Data Terminal Equipment), so use a straight-through cable when connecting to a DCE device like a modem, or a null-modem cable when connecting to another DTE device like a PC.
Does the NXV-300 support wireless control?
The NXV-300 itself does not have built-in Wi-Fi, but it can work with AMX Modero wireless touch panels through an Ethernet connection. To enable wireless access, you can connect the controller to a Wi-Fi access point on the same network.
How do I troubleshoot connection issues with the NXV-300?
Start by checking the power LED to ensure the controller is on. Verify the network cable is securely connected and that the IP address is in the same subnet as your PC. Use the AMX Discovery utility to see if the device responds. If the problem persists, perform a factory reset.
Can I schedule events on the NXV-300?
Yes, the NXV-300 includes a scheduling engine that allows you to automate tasks based on time, date, or even astronomical events like sunrise and sunset. Use the NetLinx Studio software to create and upload schedules.
User questions about NXV-300 AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual NXV-300 - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NXV-300 by AMX.
USER MANUAL NXV-300 AMX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMX
Model : NXV-300
Category : Controller