SC-N8002 - Controller AMX - Free user manual and instructions
Find the device manual for free SC-N8002 AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Controller |
| Brand | AMX |
| Model | SC-N8002 |
| Dimensions (H x W x D) | 1.75 x 19 x 10.5 inches (1U rackmount) |
| Weight | Approximately 5.5 lbs (2.5 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz, 30W max |
| Power Consumption | 30W (typical) |
| Control Interfaces | Ethernet (TCP/IP), RS-232, IR, relay, input/output |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 10% to 90% non-condensing |
| Mounting | 1U rackmount, brackets included |
| Main Functions | Centralized control of AV devices, programmable macros, IR learning, RS-232 pass-through, IP control |
| Programming | Via NetLinx Studio or compatible software |
| Firmware Update | Via Ethernet or USB (if available) |
| Safety Precautions | Use only provided power supply; do not expose to liquids; disconnect before cleaning |
| Cleaning Instructions | Wipe with a dry, soft cloth; no solvents or abrasives |
| Spare Parts & Repairability | Contact AMX support for service; no user-serviceable parts |
| Compliance | CE, FCC Class A, RoHS |
| Warranty | Limited 2-year warranty (check local regulations) |
Frequently Asked Questions - SC-N8002 AMX
How do I program the SC-N8002 controller?
You can program the SC-N8002 using AMX's NetLinx Studio software, which allows you to create and upload control code via Ethernet or USB.
What is the default IP address for the SC-N8002?
The default IP address is typically 192.168.1.100 with subnet mask 255.255.255.0. You can reset to defaults by holding the reset button.
Can I use this controller with third-party devices?
Yes, the SC-N8002 supports standard control protocols like RS-232, IR, and TCP/IP, making it compatible with most AV devices.
How do I perform a factory reset?
Press and hold the reset button on the front panel for 10 seconds until all LEDs flash. This restores factory settings.
What power supply does the SC-N8002 require?
It uses an internal power supply accepting 100-240 VAC, 50/60 Hz. Use only the provided power cord.
How many IR outputs does the controller have?
The SC-N8002 typically includes 8 IR output ports for controlling devices via IR emitters.
Is the controller rack-mountable?
Yes, it is designed for 1U rackmount installation. Rack ears are included.
How do I update the firmware?
Use NetLinx Studio to upload the latest firmware file via Ethernet. Ensure the controller is connected to the network.
What should I do if the controller is not responding?
Check power and network connections. Try a factory reset. If still unresponsive, contact AMX technical support.
Where can I find the user manual?
The manual is available for free download on notice-facile.com or the AMX support site.
User questions about SC-N8002 AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual SC-N8002 - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-N8002 by AMX.
USER MANUAL SC-N8002 AMX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMX
Model : SC-N8002
Category : Controller