Beomaster 4500 - Receiver BANG & OLUFSEN - Free user manual and instructions
Find the device manual for free Beomaster 4500 BANG & OLUFSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Bang & Olufsen |
| Model | Beomaster 4500 |
| Product Type | Stereo Receiver |
| Amplifier Output | 2 x 45 W RMS into 8 ohms |
| Total Harmonic Distortion | 0.09% at rated output |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Tuner Bands | FM and AM with 20 station presets |
| Audio Inputs | Phono (MM), Tape 1, Tape 2, CD, Aux |
| Audio Outputs | Two sets of speakers, headphone jack |
| Remote Control | Beolink wired and IR control (remote included) |
| Timer | Automatic on/off and sleep timer |
| Dimensions (W x H x D) | 380 x 100 x 340 mm |
| Weight | 5.2 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 60 W idle, 280 W maximum |
| Cabinet Material | Anodized aluminum and molded plastic |
| Cleaning | Wipe with a soft dry microfiber cloth |
| Safety | Disconnect the power cord before cleaning |
| Spare Parts | Available from authorized B&O service centers |
| Repairability | Modular design for easy access and service |
Frequently Asked Questions - Beomaster 4500 BANG & OLUFSEN
What is the output power of the Beomaster 4500?
The Beomaster 4500 delivers 2 x 45 watts RMS into an 8-ohm load, providing a clean, dynamic sound for typical home speakers.
How do I connect speakers to the Beomaster 4500?
Connect each speaker to the red (positive) and black (negative) terminals on the back of the unit, ensuring polarity is consistent. Use speaker wire with banana plugs or bare wire.
How do I set preset radio stations?
Tune to the desired FM or AM station, then press and hold one of the 20 preset buttons (numbered 1-20) until the display flashes, confirming the station is stored.
What is the Beolink feature?
Beolink is B&O's multi-room control system that allows the Beomaster 4500 to connect and cooperate with other Bang & Olufsen components using a wired or IR link. It enables central control and source sharing.
How should I clean the front panel and controls?
Use a soft, lint-free cloth slightly dampened with water. Never apply harsh chemicals, ammonia, or abrasive cleaners. After cleaning, dry the panel with a dry cloth.
Why is there no sound when I select a source?
First, check that the speakers are connected and the speaker selector is set correctly. Ensure the input source is active and the volume is not at minimum. If using external components, verify their output is working.
How do I connect a CD player?
Connect the CD player's audio outputs to the CD input jacks on the rear panel using RCA cables. Then select 'CD' on the source selector.
Does the Beomaster 4500 have a phono input?
Yes, it has a dedicated phono input designed for a moving magnet (MM) cartridge. You can connect a turntable with an MM cartridge directly to these inputs.
How do I reset the receiver to factory settings?
Press and hold the Power button for at least five seconds while the unit is turned on. This resets the microprocessor and clears all user settings, including presets.
Can it be left on permanently?
Leaving the unit on continuously is safe, but to save energy and extend the life of components, it's recommended to switch off using the main power switch when not in use, and to disconnect the power during thunderstorms.
User questions about Beomaster 4500 BANG & OLUFSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Beomaster 4500 - BANG & OLUFSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Beomaster 4500 by BANG & OLUFSEN.
USER MANUAL Beomaster 4500 BANG & OLUFSEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BANG & OLUFSEN
Model : Beomaster 4500
Category : Receiver