Beomaster 5500 - Receiver BANG & OLUFSEN - Free user manual and instructions
Find the device manual for free Beomaster 5500 BANG & OLUFSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Stereo receiver with integrated AM/FM tuner |
| Brand | Bang & Olufsen |
| Model | Beomaster 5500 |
| Category | Hi-Fi component system |
| Channels | 2.0 stereo, 2 x 55 W RMS at 8 ohms |
| Tuner | FM/AM with digital tuning and 10 presets |
| Inputs | Phono, CD, Tape, Aux |
| Outputs | 2 pairs of speaker terminals, 2 recording outputs |
| Headphone output | 3.5 mm stereo jack |
| Dimensions (W x H x D) | 64 cm x 8 cm x 26 cm |
| Weight | 6.5 kg |
| Power consumption | 35 W standby, 150 W maximum |
| Mains supply | 120/230 V AC, 50/60 Hz |
| Frequency response | 20 Hz - 20 kHz, ±0.5 dB |
| Signal-to-noise ratio | 85 dB |
| Remote control | B&O Master Control Panel or Beolink wired remote |
| Standby timer | Alarm and sleep timer functions |
| Accessories included | Power cord, FM wire antenna, AM loop antenna, Master Control Panel |
| Cleaning and maintenance | Wipe top and buttons with dry soft cloth; never use liquids or aerosol sprays |
| Safety precautions | Disconnect at mains before cleaning; allow free airflow around vents |
| Spare parts and repairability | Modern capacitors and service kits available from B&O parts suppliers |
| Country of origin | Denmark |
| Production period | 1985-1989 |
Frequently Asked Questions - Beomaster 5500 BANG & OLUFSEN
How do I connect the Beomaster 5500 to my speakers?
Use bare wire or 4 mm banana plugs. Connect the red terminal to the positive (+) and the black terminal to the negative (-) on each speaker. Ensure all connections are tight and secure to avoid short circuits.
Can I control the Beomaster 5500 with my existing Bang & Olufsen remote?
Yes, if your remote has the original Master Control Panel functions. The Beomaster 5500 is compatible with most wired or Beolink remote controls that support the same infrared codes.
How do I set the tuner presets?
Tune to your desired station using the tuning buttons, then press and hold the preset number (1–10) for about 3 seconds until the display flashes. Release the button; the station is now stored.
What is the purpose of the Beolink connector on the back?
The Beolink connector allows the receiver to integrate into a multiroom audio system. It sends and receives control signals so you can operate the Beomaster 5500 from other rooms or a central Beolink controller.
Why is there no sound from one channel?
First check speaker connections and the balance control. If the issue persists, inspect the internal fuses. If all else fails, the amplifier module may need servicing by a qualified technician.
How do I clean the glass top without leaving streaks?
Use a microfibre cloth slightly dampened with water or a dedicated glass cleaner. Wipe gently in one direction and avoid touching the aluminium buttons with wet fingers. Never use abrasive cleaners.
Can I use modern CD players with this receiver?
Yes, use the CD input on the back. If the CD player has a fixed line-level output, set the receiver's volume accordingly. Adjust the input sensitivity if necessary for optimal sound.
What is the power output of the amplifier?
The Beomaster 5500 delivers 2 x 55 W RMS at 8 ohms. This is sufficient for most bookshelf speakers and small to medium rooms, giving a clean and dynamic listening experience.
How do I reset the receiver to factory defaults?
Turn off the unit, then press and hold the reset button on the back panel for 5 seconds. Reconnect the power and switch on. All presets and settings will return to factory defaults.
Is it worth repairing an old Beomaster 5500?
Absolutely, B&O units are highly repairable. Service kits, including capacitors and idler wheels, are available from specialist suppliers. Investing in repairs preserves the classic B&O sound and build quality.
User questions about Beomaster 5500 BANG & OLUFSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Beomaster 5500 - BANG & OLUFSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Beomaster 5500 by BANG & OLUFSEN.
USER MANUAL Beomaster 5500 BANG & OLUFSEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BANG & OLUFSEN
Model : Beomaster 5500
Category : Receiver