MC-58 - Receiver MCINTOSH - Free user manual and instructions
Find the device manual for free MC-58 MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | McIntosh |
| Model | MC-58 |
| Amplifier Power | 35 watts per channel at 8 ohms |
| Tuner Bands | FM / AM |
| FM Tuning Range | 88–108 MHz |
| AM Tuning Range | 530–1600 kHz |
| Signal-to-Noise Ratio | 70 dB (FM) |
| Total Harmonic Distortion | 0.5% |
| Inputs | Phono, Aux, Tape, Tuner |
| Outputs | Speaker A/B, Headphone |
| Power Supply | 120V AC, 60Hz |
| Power Consumption | 150 watts max |
| Dimensions (W x H x D) | 17 x 5.5 x 12 inches |
| Weight | 28 lbs |
| Chassis | Brushed aluminum front panel, wood side panels |
| Controls | Volume, balance, bass, treble, input selector, tuning knob |
| Indicators | Signal strength meter, tuning meter, FM stereo lamp |
| Cooling | Convection cooling, no fan |
| Maintenance | Clean with dry soft cloth |
| Safety | Do not expose to moisture, ensure proper ventilation |
| Spare Parts | Available through McIntosh authorized service centers |
| Manual Language | English |
Frequently Asked Questions - MC-58 MCINTOSH
How do I connect my speakers to the MC-58?
Connect the right speaker to the Right Speaker Terminal and the left speaker to the Left Speaker Terminal. Ensure the impedance is at least 8 ohms for proper operation.
How do I set the FM antenna?
Attach a good quality FM antenna to the FM Antenna Input on the rear panel. For best reception, orient the antenna toward the transmitting tower and adjust for minimal distortion.
What is the recommended maintenance?
Regularly wipe the front panel with a soft dry cloth. Avoid abrasive cleaners. Periodically check all connections and ensure the unit is well ventilated.
Why is there no sound from one channel?
Check the Balance Control and ensure it is centered. Verify that the speaker connections are secure and not shorted. If the problem persists, the internal amplifier channel may need service.
Can I use it with a turntable?
Yes, plug your turntable into the Phono Input. Ensure your turntable has a moving magnet (MM) cartridge and the grounding wire is connected to the GND terminal.
How do I clean the front panel?
Use a microfiber cloth slightly dampened with water or a mild glass cleaner. Never spray directly onto the panel; apply to the cloth first.
What should I do if the FM stereo indicator doesn't light?
Ensure you are tuned to a strong stereo FM station. Check the antenna connection and reposition for better signal. If the lamp remains off, the FM stereo decoder might need service.
How do I reset the receiver after a power outage?
Simply press the Power Switch to the OFF position, wait a few seconds, then turn it back ON. The unit will return to the last used settings.
Are replacement knobs available?
Yes, replacement knobs are available through McIntosh authorized service centers. Contact them with your model number MC-58 to order exact matches.
How do I adjust the volume balance?
Turn the Balance Control to the left or right to attenuate the opposite channel. Set it to the center position for equal volume in both channels.
User questions about MC-58 MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MC-58 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MC-58 by MCINTOSH.
USER MANUAL MC-58 MCINTOSH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MCINTOSH
Model : MC-58
Category : Receiver