BE 40.40 1C - Kitchen sink TEKA - Free user manual and instructions
Find the device manual for free BE 40.40 1C TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Kitchen Sink |
| Brand | Teka |
| Model | BE 40.40 1C |
| Material | Stainless Steel (AISI 304) |
| Finish | Brushed Satin |
| Installation Type | Drop-in (Top-mount) |
| Number of Bowls | 1 |
| Main Bowl Shape | Square |
| Overall Dimensions (L x W x D) | 400 x 400 x 170 mm |
| Bowl Dimensions | 350 x 350 x 170 mm |
| Drain Hole Diameter | 90 mm (3.5") |
| Weight | Approx. 5 kg |
| Included Fittings | Mounting Kit, Strainer |
| Surface Protection | Scratch-resistant |
| Heat Resistance | High |
| Cleaning Instructions | Use mild detergent, soft cloth |
| Mobility | Fixed |
| Warranty | 2 years |
Frequently Asked Questions - BE 40.40 1C TEKA
How do I install the Teka BE 40.40 1C kitchen sink?
To install the sink, place the included mounting kit around the edge, apply marine-grade sealant to sink lip, and lower into the cutout. Tighten clips evenly underneath. Ensure countertop cutout is 395 x 395 mm.
What are the exact dimensions of the BE 40.40 1C?
The overall dimensions are 400 mm x 400 mm, with a depth of 170 mm. The bowl size is approximately 350 x 350 mm.
Can the sink be installed as undermount?
No, the Teka BE 40.40 1C is designed for drop-in installation with a visible rim. For an undermount look, consider a model designed specifically for that.
How do I clean the stainless steel sink to avoid scratches?
Use warm water with a mild detergent and a soft sponge. Rinse thoroughly and dry with a soft cloth. Avoid abrasive pads, bleach, and acid cleaners. For stubborn marks, use baking soda.
Does the sink come with a drain and overflow?
Yes, a stainless steel strainer is included. The sink features a pre-punched drain hole of 90 mm diameter. It does not include overflow; most single-bowl sinks omit it.
What type of faucet can I use with this sink?
The sink accommodates standard kitchen faucets with a 1/2" connection. Mounting holes are not pre-drilled, so you may drill for a deck-mounted faucet or install one on the countertop.
How much does the Teka BE 40.40 1C weigh?
The approximate weight is 5 kg, making it easy to handle during installation.
Is the sink compatible with a waste disposal unit?
Yes, the drain hole size (3.5") is compatible with most standard waste disposal units. Ensure your cabinet space is adequate.
What is the warranty on this Teka sink?
Teka offers a 2-year warranty against manufacturing defects, covering any faults in material and workmanship.
How do I remove minor scratches from the sink?
Minor scratches can be minimized by gently rubbing along the grain with a fine abrasive pad or a special stainless steel polish. For deep scratches, contact a professional.
User questions about BE 40.40 1C TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Kitchen sink in PDF format for free! Find your manual BE 40.40 1C - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BE 40.40 1C by TEKA.
USER MANUAL BE 40.40 1C TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : BE 40.40 1C
Category : Kitchen sink