GR-P267TLQ - Refrigerator LG - Free user manual and instructions
Find the device manual for free GR-P267TLQ LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerator (Side-by-Side) |
| Brand | LG |
| Model | GR-P267TLQ |
| Installation Type | Freestanding |
| Total Capacity | Approximately 26.7 cu ft (750 liters) |
| No Frost Technology | Total No Frost |
| Cooling System | Multi Air Flow |
| Compressor | Inverter Linear Compressor |
| Digital Control Panel | Touch LED display |
| Water Dispenser | Built-in water & ice dispenser |
| Ice Maker | Automatic Twisting Ice Maker |
| Shelves | Tempered glass shelves |
| Interior Lighting | LED lighting |
| Door Baskets | Adjustable door bins |
| Refrigerant | R600a (isobutane) |
| Energy Efficiency Class | A+ (approximately) |
| Power Supply | 220-240 V, 50 Hz |
| Dimensions (W x H x D) | Approx. 912 x 1790 x 740 mm |
| Weight | Approx. 120 kg |
Frequently Asked Questions - GR-P267TLQ LG
How do I adjust the temperature on my LG GR-P267TLQ refrigerator?
Use the digital control panel on the front of the dispenser. Press the Fridge or Freezer button repeatedly to cycle through the temperature settings. The display shows the current set temperature in degrees Celsius. Wait a few seconds after adjusting for the setting to be saved.
How often should I replace the water filter?
The water filter should typically be replaced every 6 months to maintain optimal water quality. If your refrigerator has a filter status indicator, it will remind you when it's time. Always replace with a genuine LG water filter to ensure compatibility and performance.
My refrigerator is not cooling properly. What should I check?
First, ensure the power cord is plugged in and the breaker hasn't tripped. Check the thermostat settings and make sure the doors are fully closed. Clean the condenser coils if dusty. Avoid blocking the internal vents, and do not overload the shelves with warm food. If the problem persists, the compressor may need service.
How do I clean the condenser coils?
Unplug the refrigerator first. Locate the coils at the back or behind the bottom grille. Use a vacuum cleaner with a soft brush attachment to gently remove dust and debris. Cleaning the coils every 6-12 months improves efficiency and prolongs the lifespan of the compressor.
What is Total No Frost and how does it work?
Total No Frost is LG's frost-free system that uses a fan and cooling circuit to circulate dry, cold air. This prevents frost from accumulating on the interior walls, so you never need to manually defrost the freezer or fridge compartments. It also helps maintain a uniform temperature throughout the appliance.
How do I reset the ice maker after a power outage?
On most LG refrigerators, simply press the Ice On/Off button on the control panel for about 3 seconds to reset the ice maker. Ensure the ice bucket is properly inserted and the water supply is connected. Discard the first batch of ice produced after a reset.
Why is there water pooling inside my refrigerator?
Water pooling can be caused by a clogged defrost drain. Locate the small drain hole at the back of the fridge (usually under the crisper drawers) and flush it with warm water using a turkey baster or syringe. A cleaning solution of baking soda and water can help remove mold and debris that block the drain.
How can I level the refrigerator?
Use the front leveling legs (adjustable feet) to raise or lower each corner until the appliance is stable and level. Turn the legs counterclockwise to raise, clockwise to lower. Place a bubble level on top of the fridge to verify. Proper leveling ensures the doors close correctly and reduces vibration noise.
How do I defrost the freezer section?
Thanks to Total No Frost, the GR-P267TLQ is designed to automatically defrost. If you notice frost buildup, it may indicate a malfunction. In that case, unplug the refrigerator, remove all food, and let the frost melt naturally. Do not use a knife or sharp object to scrape ice. After defrosting, plug the unit back in and allow it to cool before restocking.
What should I do if the digital display shows an error code?
Write down the error code shown on the display and consult your user manual for its meaning. Common codes indicate a communication error, temperature sensor fault, or compressor issue. Try resetting the refrigerator by unplugging it for 10 minutes and plugging it back in. If the code persists, contact LG customer service for professional diagnosis and repair.
User questions about GR-P267TLQ LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual GR-P267TLQ - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GR-P267TLQ by LG.