EMME-AS-80-M-HS-ASB - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free EMME-AS-80-M-HS-ASB Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stepper motor for industrial automation |
| Series | EMME-AS |
| Flange Size | 80 mm |
| Rated Torque | 3.5 Nm (approx.) |
| Rated Speed | 3000 rpm (high-speed version) |
| Operating Voltage | 24 V DC |
| Max Current | 6 A per phase (approx.) |
| Feedback System | Hall sensors / optional encoder |
| Communication Interface | Digital I/O |
| Shaft Type | Round shaft with keyway |
| Protection Class | IP54 |
| Ambient Temperature | 0 °C to +40 °C |
| Weight | 2.8 kg (approx.) |
| Mounting | Flange mounting per IEC 72-1 |
| Maintenance | Maintenance-free |
| Cleaning | Wipe with dry cloth; avoid solvents |
| Safety | Overload protection required |
| Spare Parts | Replacement cables and connectors available |
| Repairability | Modular design with replaceable motor coil |
| Brand | Festo |
Frequently Asked Questions - EMME-AS-80-M-HS-ASB Festo
What is the recommended controller for the EMME-AS-80-M-HS-ASB?
This motor requires a controller capable of delivering 24 V DC at 6 A per phase for optimal performance. Festo recommends its own CMMO-ST series for seamless integration.
How do I install this motor correctly?
Mount the motor using the 80 mm flange according to IEC 72-1. Ensure the shaft is properly aligned and tightened with the provided keyway. Connect the motor cable to a suitable digital I/O controller.
What are the key features of the EMME-AS-80-M-HS?
The EMME-AS-80-M-HS is a high-speed stepper motor with a rated speed of 3000 rpm. It features Hall sensors, an IP54 enclosure, and a maintenance-free design for industrial environments.
What should I do if the motor overheats?
Check for overload conditions and reduce current to the recommended 6 A per phase. Ensure sufficient airflow around the motor and verify the ambient temperature stays below 40 °C.
Can I use a gearbox with this motor?
Yes, the motor can be paired with a planetary gearbox available from Festo. The flange size and shaft dimensions are compatible with standard gearboxes for NEMA 34 motors.
How do I set the current limit on the controller?
Use the controller's software or dip switches to set the current to 6 A per phase. For safe operation, do not exceed this value. Refer to the controller manual for precise instructions.
Is the EMME-AS-80-M-HS-ASB maintenance-free?
Yes, the motor is maintenance-free. Only periodic cleaning with a dry cloth is required. Do not use solvents or water, and avoid disassembly as it may damage internal components.
What does the HS suffix indicate?
The HS stands for High Speed, meaning the motor is optimized for rapid motion with a nominal speed of 3000 rpm instead of the standard 1500 rpm.
How long can the motor cable be?
The maximum recommended cable length is 25 meters when using a high-quality shielded cable. For longer distances, use a cable with lower capacitance or an external encoder feedback line.
How do I order spare parts for this motor?
Contact your local Festo distributor and provide the model number EMME-AS-80-M-HS-ASB. Common spare parts include connector kits and shaft seals.
User questions about EMME-AS-80-M-HS-ASB Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual EMME-AS-80-M-HS-ASB - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EMME-AS-80-M-HS-ASB by Festo.
USER MANUAL EMME-AS-80-M-HS-ASB Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : EMME-AS-80-M-HS-ASB
Category : Industrial Automation