YSR-32-60-C - Shock Absorber Festo - Free user manual and instructions
Find the device manual for free YSR-32-60-C Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hydraulic Shock Absorber |
| Manufacturer | Festo |
| Model | YSR-32-60-C |
| Series | YSR |
| Piston Diameter | 32 mm |
| Stroke Length | 60 mm |
| Mounting Thread | M32 x 1.5 |
| Max. Impact Velocity | 3 m/s |
| Max. Energy per Cycle | 180 Nm |
| Max. Energy per Hour | 190,000 Nm/h |
| Adjustable Damping | Yes, via adjustment screw |
| Weight | Approx. 1.6 kg |
| Body Material | Steel, nickel-plated |
| Piston Rod Material | Hardened stainless steel |
| Operating Temperature | -10 °C to +80 °C |
| Impact Direction | Axial |
| Self-contained | Yes, oil-filled and sealed |
| Maintenance | Clean body regularly and check damping performance |
| Safety Note | Do not loosen the adjustment screw beyond the end stop |
| Spare Parts / Repairability | Full unit replacement; internal parts not field-serviceable |
| Typical Applications | Pneumatic cylinders, handling systems, automation equipment |
Frequently Asked Questions - YSR-32-60-C Festo
What is the adjustment screw for on the Festo YSR-32-60-C shock absorber?
The adjustment screw allows you to vary the damping force to match the impact energy. Turn it clockwise for a harder damping effect and counterclockwise for a softer one. Always adjust within the specified range to prevent damage.
How do I mount the YSR-32-60-C?
Mount the shock absorber using the M32 x 1.5 thread. Tighten it with a suitable wrench, but do not exceed the maximum tightening torque. Ensure the impact direction is axial to avoid side loads that could damage the rod.
What is the maximum impact capacity?
The YSR-32-60-C can absorb up to 180 Nm per cycle and 190,000 Nm per hour. The maximum impact velocity is 3 m/s. Exceeding these limits may result in persistent failure or reduced service life.
What oil is inside the shock absorber?
The shock absorber is factory-filled with a high-grade hydraulic oil that is sealed inside. It does not require refilling or oil changing under normal operating conditions. If oil leaks are observed, replace the unit immediately.
Can I use this shock absorber in a vertical application?
Yes, the YSR-32-60-C can be mounted in any orientation. However, for vertical applications (rod facing downward), be aware that the impact velocity and energy should be calculated including the accelerated mass due to gravity. Contact Festo for sizing assistance if needed.
How do I know if the shock absorber needs replacing?
Signs of wear include increased impact noise, loss of damping (bouncing effect), oil leakage on the exterior, or visible damage to the piston rod. If any of these occur, replace the shock absorber to maintain safe operation.
What are the recommended installation torque values?
The recommended tightening torque for the M32 x 1.5 thread is approximately 80 Nm. Use a thread lock adhesive when mounting into a tapped hole to prevent loosening from vibration. Avoid over-tightening to prevent deformation.
Can the YSR-32-60-C be repaired?
The shock absorber is designed as a sealed, non-serviceable unit. Internal parts are not field-replaceable. If the unit is defective or worn, the entire shock absorber must be replaced, ensuring proper disposal of the oil-contained unit.
What is the operating temperature range?
The YSR-32-60-C is designed to operate within a temperature range of -10 °C to +80 °C. Operation outside this range may cause seal failure or inconsistent damping behavior. For extreme conditions, contact Festo for special variants.
Is the shock absorber suitable for use in cleanrooms?
This standard model is not specifically classified for cleanroom use. If you require a cleanroom-compatible version, consider Festo's cleanroom shock absorbers or consult the manufacturer for options. Regular cleaning of the exterior is recommended for any controlled environment.
User questions about YSR-32-60-C Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Shock Absorber in PDF format for free! Find your manual YSR-32-60-C - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YSR-32-60-C by Festo.
USER MANUAL YSR-32-60-C Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : YSR-32-60-C
Category : Shock Absorber