YSR-16-20-C - Actuator Festo - Free user manual and instructions
Find the device manual for free YSR-16-20-C Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Cylinder Actuator |
| Brand | Festo |
| Model | YSR-16-20-C |
| Category | Actuator |
| Actuation Type | Double-acting |
| Bore Size | 16 mm |
| Stroke Length | 20 mm |
| Operating Pressure | 1 to 10 bar |
| Operating Temperature | -20 °C to +80 °C |
| Theoretical Force (Push) | 120 N at 6 bar |
| Theoretical Force (Pull) | 90 N at 6 bar |
| Port Size | M5 |
| Cushioning | Self-adjusting cushioning at both ends |
| Piston Rod Diameter | 6 mm |
| Weight | 0.2 kg |
| Dimensions | Approx. 45 x 25 x 25 mm (length x width x height) |
| Material | Aluminum body, stainless steel piston rod |
| Main Function | Converts compressed air into linear motion |
| Installation | Flexible mounting via end caps or accessories |
| Maintenance | Periodic check of seals and rod wiper |
| Cleaning | Wipe with damp cloth; do not submerge |
| Safety | Operate within specified pressure and temperature limits |
| Spare Parts | Seals, piston rod, end caps available from Festo |
| Repairability | Rebuildable with standard seal kits |
| Standards | Complies with ISO 6432 for interchangeable cylinders |
Frequently Asked Questions - YSR-16-20-C Festo
What is the bore size and stroke length of the Festo YSR-16-20-C?
The **Festo YSR-16-20-C** has a **16 mm bore** and a **20 mm stroke**, making it a compact pneumatic cylinder for linear motion.
What is the maximum operating pressure for this actuator?
The maximum operating pressure is **10 bar**. It is recommended to operate between **1 and 10 bar** for optimal performance and safety.
How should I mount the YSR-16-20-C cylinder?
The cylinder can be mounted using **end caps, foot mounts, or flange accessories** available from Festo. Ensure proper alignment to avoid side loads.
Can the cylinder speed be controlled?
Yes, the speed can be controlled using **flow control valves** or **speed controllers** connected to the ports. Adjusting the exhaust air flow gives precise control.
What type of lubrication is required for this cylinder?
The cylinder is **pre-lubricated** and can operate without additional lubrication. If needed, use a **light ISO VG 32 oil**; avoid over-lubricating.
How do I clean the cylinder?
Clean the outside with a **damp, lint-free cloth** and mild detergent. Do not submerge the cylinder or use aggressive solvents that could damage seals.
What should I do if the cylinder is leaking air?
Check the **tube connection** and **rod wiper** for damage. If leaks persist, replace the **seal kit**. Always depressurize the system before maintenance.
Can I use this cylinder at low temperatures?
The operating temperature range is **-20 °C to +80 °C**. For temperatures below -20 °C, special seals or air preparation are required.
Is the YSR-16-20-C interchangeable with other ISO 6432 cylinders?
Yes, it complies with **ISO 6432**, so it is dimensionally interchangeable with other cylinders of the same standard, but check port sizes and mounting patterns.
What is the theoretical force output at 6 bar?
At **6 bar**, the theoretical push force is **120 N** and the pull force is **90 N** due to the piston rod area. Actual force may be slightly lower due to friction.
User questions about YSR-16-20-C Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Actuator in PDF format for free! Find your manual YSR-16-20-C - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YSR-16-20-C by Festo.
USER MANUAL YSR-16-20-C Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : YSR-16-20-C
Category : Actuator