XSPROHAMMER - Chair KeepOut - Free user manual and instructions
Find the device manual for free XSPROHAMMER KeepOut in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ergonomic Office Chair |
| Brand | KeepOut |
| Model | XSPROHAMMER |
| Overall Height | 115–135 cm (adjustable) |
| Seat Width | 50 cm |
| Seat Depth | 50 cm |
| Seat Height | 45–55 cm (adjustable) |
| Backrest Height | 58 cm |
| Armrest Type | Padded, height adjustable |
| Armrest Adjustment Range | 20–30 cm from seat |
| Recline Angle | 90°–160° |
| Tilt Tension | Adjustable |
| Lumbar Support | Adjustable height and depth |
| Headrest | Included, adjustable |
| Weight Capacity | 120 kg (265 lbs) |
| Net Weight | 16 kg |
| Frame Material | Reinforced steel |
| Upholstery Material | Breathable PU leather |
| Seat Filling | High-density molded foam |
| Base Material | Nylon reinforced with steel hub |
| Caster Type | 60 mm silent PU casters |
| Assembly Required | Yes (instructions included) |
| Care Instructions | Wipe with soft damp cloth; avoid abrasive cleaners |
| Safety Compliance | BIFMA X5.1 tested |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - XSPROHAMMER KeepOut
How do I adjust the seat height of the XSPROHAMMER chair?
Locate the pneumatic lever under the seat. While sitting, push the lever up to raise or lower the seat. Release once the desired height is reached. The mechanism operates within a 45–55 cm range.
How do I recline the backrest?
Pull the recline handle located on the right side of the seat. Lean back to adjust the angle up to 160°. For locking at a specific angle, use the tilt lock knob to secure the position.
How do I adjust the lumbar support?
The lumbar pillow can be moved vertically along the backrest. Press the slider release on the back of the pillow and slide it to your preferred height. Depth can be adjusted by turning the tension dial on the side.
How do I clean the PU leather upholstery?
Use a soft damp cloth with mild soap to wipe the surface. Avoid abrasive cleaners or solvents. Dry with a lint-free cloth. Regular cleaning will maintain the breathable finish.
What is the maximum weight capacity of this chair?
The chair is rated for 120 kg (265 lbs). Ensure your weight does not exceed this limit to preserve the safety and durability of the frame and base.
How do I replace the casters?
To replace a caster, turn the chair upside down, grip the wheel and pull firmly out of the base socket. Push the new PU caster straight in until it clicks. The standard 11 mm stem fits most chairs.
Does the chair come with a headrest? How do I adjust it?
Yes, the chair includes an adjustable headrest. To change its height, pull the headrest upward in a sliding motion. For angle adjustment, tilt the headrest to the desired position. It locks securely in place.
How long does assembly take and what tools are needed?
Assembly typically takes 15–20 minutes. All necessary tools are included, but a Phillips screwdriver may speed up the process. Follow the step-by-step instructions in the manual for proper installation.
What should I do if the chair squeaks during rotation or reclining?
Apply a small amount of silicone lubricant to the gas lift cylinder and the tilt mechanism. Check that all bolts and screws are tightened. If the noise persists, contact KeepOut support for replacement parts.
Is the chair suitable for use on carpets?
Yes, the smooth PU casters are designed for both hard floors and low-pile carpets. They won't scratch hard surfaces. For thicker carpets, a chair mat is recommended for easier movement.
User questions about XSPROHAMMER KeepOut
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chair in PDF format for free! Find your manual XSPROHAMMER - KeepOut and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XSPROHAMMER by KeepOut.