AWM 401 TD - Microphone Audibax - Free user manual and instructions
Find the device manual for free AWM 401 TD Audibax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Audibax |
| Model | AWM 401 TD |
| Product Type | Wireless Microphone System |
| Frequency Band | UHF 600-700 MHz |
| Receiver Type | Tabletop / Rack-mountable |
| Diversity Reception | True Diversity (dual antenna system) |
| Microphone Type | Handheld Dynamic Microphone |
| Polar Pattern | Cardioid |
| Number of Channels | 100 selectable frequencies |
| Transmission Range | Up to 50 meters (line of sight) |
| Frequency Response | 50 Hz - 15 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| Microphone Battery | 2 AA batteries |
| Receiver Power Supply | AC adapter (12V / 500mA) |
| Audio Output | Balanced XLR and unbalanced 6.35mm jack |
| Receiver Dimensions | 420 x 180 x 50 mm |
| Microphone Dimensions | 250 x 50 mm |
| Receiver Weight | 1.8 kg |
| Microphone Weight | 0.3 kg (without batteries) |
| Maintenance | Clean microphone mesh and receiver casing with a soft dry cloth |
| Safety | Keep away from moisture and extreme temperatures |
| Spare Parts & Repair | Contact Audibax customer service for replacement parts |
Frequently Asked Questions - AWM 401 TD Audibax
How do I connect the wireless microphone system to an amplifier?
Connect the receiver's output (either XLR or 6.35mm jack) to the corresponding input on your amplifier or mixer. Use a balanced XLR cable for professional setups to minimize noise, and ensure the receiver is turned on before adjusting the volume.
How do I change the batteries in the handheld microphone?
Unscrew the lower sleeve of the microphone handle, insert two AA batteries (compatible with the polarity markings), and re-screw the sleeve. Replace batteries when the red low-battery indicator lights up or if you notice audio dropouts.
How can I avoid interference with other wireless devices?
Prioritize using a frequency that is not occupied by other wireless microphones. The AWM 401 TD offers 100 selectable channels; choose one that is free by performing a channel scan if available, and keep a clear line of sight between transmitter and receiver.
What is the maximum operating range of the AWM 401 TD?
The maximum wireless range is 50 meters with a clear line of sight. Walls, obstacles, and other RF interference can reduce this range significantly. For best performance, avoid blocking the receiver antennas.
Can I use multiple microphones simultaneously?
Yes, you can use several AWM 401 TD systems at the same time by setting each system to a different frequency. To avoid intermodulation distortion, select frequencies that are far apart or a compatible frequency group. Refer to the manual for recommended frequency sets.
How do I clean the microphone?
Use a soft, dry cloth to wipe the metal mesh and the plastic housing. For stubborn dirt, slightly dampen the cloth and avoid solvents. Always disconnect the microphone from the receiver and remove batteries before cleaning.
Is the receiver compatible with other microphone brands?
The receiver is designed to work only with the Audibax AWM 401 TD handheld transmitter. Other brands may use different frequency bands or modulation. For reliable operation, use the included transmitter.
How do I store the equipment when not in use?
Remove the batteries from the transmitter and store it and the receiver in a cool, dry place away from direct sunlight and humidity. Use the original packaging or a soft bag to protect them from dust and accidental bumps.
What should I do if there is no sound?
If no sound comes out, follow these steps: check that the transmitter and receiver are powered on, verify the frequency matches, confirm the volume knob is set correctly, test the audio cable, and ensure the amplifier/mixer input is selected properly. If the issue persists, try replacing the batteries or scanning another frequency.
Can I use the receiver with a PA system?
Absolutely. Connect the receiver's output to a PA system, powered speaker, or mixing console. Use a balanced XLR connection for long cable runs to maintain signal integrity and reduce hum.
User questions about AWM 401 TD Audibax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual AWM 401 TD - Audibax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWM 401 TD by Audibax.
USER MANUAL AWM 401 TD Audibax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audibax
Model : AWM 401 TD
Category : Microphone