SDW455 - Dishwasher Sauber - Free user manual and instructions
Find the device manual for free SDW455 Sauber in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Sauber |
| Model | SDW455 |
| Product Type | Dishwasher |
| Installation Type | Freestanding |
| Dimensions (H × W × D) | 85 × 60 × 60 cm |
| Weight | Approximately 50 kg |
| Power Supply | 220 - 240 V, 50 Hz |
| Rated Power | 2000 W |
| Energy Efficiency Class | A+ |
| Water Consumption per Cycle | 12 Litres |
| Noise Level | 49 dB(A) |
| Number of Programs | 6 |
| Wash Programs | Intensive, Normal, Eco, Quick, Glass, Rinse |
| Place Settings | 12 Place Settings |
| Drying System | Residual Heat Drying |
| Control Type | Electronic |
| Display | LED |
| Delay Start | 1-24 Hours |
| Child Lock | Yes |
| Water Softener | Built-in |
| Cutlery Basket | Yes |
| Adjustable Racks | Height-Adjustable Upper Rack |
| Overload Protection | Yes |
| Maintenance | Clean Filter and Spray Arms Regularly |
Frequently Asked Questions - SDW455 Sauber
How do I install my Sauber SDW455 dishwasher?
Connect the water inlet hose to a cold water supply and the drain hose to a siphon or standpipe. Ensure the power cord is plugged into an earthed outlet. Level the appliance using the adjustable feet. Run an initial rinse program without dishes to check for leaks.
What detergent and rinse aid should I use?
Use a dishwasher detergent in powder, gel, or tablet form, and a rinse aid to improve drying. Add the rinse aid to the designated reservoir. Always follow the manufacturer's recommendations on dosage.
Why is my dishwasher not draining?
Check the drain hose for kinks or blockages. Clean the filter and the sump area. Also, ensure the pump impeller is not jammed. If the problem persists, contact a qualified technician.
How do I clean the dishwasher interior?
Wipe the door gasket and the interior with a damp cloth. Remove and clean the filter under running water once a week. Run a maintenance cycle with a dishwasher cleaner or a cup of vinegar on an empty machine to remove limescale and odors.
How can I descale my dishwasher?
Fill the detergent dispenser with citric acid or a descaler, select a high-temperature program (e.g., Intensive) and run it without dishes. Repeat every few months depending on water hardness.
Why are my dishes not clean after a cycle?
Possible causes include overloading, improper loading blocking spray arms, insufficient detergent, or choosing a too-short program. Ensure that items face the spray arms and that the water pressure is adequate.
How do I reset the dishwasher?
Turn off the dishwasher using the power button, then switch it off at the mains for 10 minutes. Restore power and start a program. If an error code persists, consult the manual.
What do the error codes mean?
Error codes vary by model. Common ones include an indicator for a blocked filter, a water supply issue, or a temperature sensor problem. Refer to the manual's error table for specific troubleshooting.
How do I use the Delay Start function?
Press the Delay button to select a delay of 1 to 24 hours. The dishwasher will start the program automatically after the set time. Close the door firmly to arm the delay timer.
Any tips for saving energy and water?
Always run a full load but avoid overloading. Select the Eco program for normal soil and use the half-load option if available. Regularly clean the filter to maintain efficiency.
User questions about SDW455 Sauber
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SDW455 - Sauber and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDW455 by Sauber.
USER MANUAL SDW455 Sauber
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sauber
Model : SDW455
Category : Dishwasher