SDW455I - Dishwasher Sauber - Free user manual and instructions
Find the device manual for free SDW455I Sauber in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Freestanding dishwasher |
| Model | SDW455I |
| Brand | Sauber |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 52 kg |
| Power supply | 220-240 V, 50 Hz |
| Rated power | 1900 W |
| Place settings | 13 |
| Energy efficiency class | A+ |
| Water consumption per cycle | 10 L |
| Noise level | 49 dB(A) |
| Number of programs | 6 |
| Programs | Eco, Intensive, Quick, Glass, Daily, Soak |
| Control type | Buttons + LED display |
| Interior material | Stainless steel |
| Salt and rinse aid indicators | Yes |
| Child lock | Yes |
| Aquastop protection | Yes |
| Filter system | Self-cleaning |
| Maintenance | Clean filters and spray arms regularly |
| Spare parts available | 10 years after purchase |
| Water softener | Built-in |
Frequently Asked Questions - SDW455I Sauber
How do I start a wash cycle on the Sauber SDW455I?
To start, load the dishwasher, add detergent, close the door, press the Power button, select the desired program (e.g., Eco or Intensive) using the program button, then press Start. The cycle begins after a few seconds.
What should I do if the dishwasher doesn't clean dishes properly?
Check that the spray arms are not blocked, use the correct amount of detergent, ensure the water temperature is sufficient, and clean the filters regularly. Also, select a more intensive program for heavily soiled loads.
How do I clean the filters?
Rotate the filter assembly counterclockwise to remove it, rinse under running water, remove large particles, and replace it correctly. Clean the filter at least once a month to maintain washing performance.
Why does the salt indicator stay lit?
Add dishwasher salt to the salt reservoir and refill with water if necessary. The indicator goes off when the salt concentration is correct. Also, ensure the reservoir cap is tight.
Can I use regular table salt instead of dishwasher salt?
No, regular salt contains impurities that can damage the water softener. Use only special dishwasher salt designed for water softening.
What is the energy consumption of the Eco program?
The Eco program uses about 0.98 kWh per cycle, with a water consumption of 10 liters and a duration of up to 3 hours. This is the most energy-efficient setting.
How do I reset the Sauber SDW455I?
To reset the appliance, press and hold the Start/Reset button for about 3 seconds during a cycle. The program will cancel and the water will drain. If the unit is frozen, unplug for 30 seconds and restart.
Why does the dishwasher leave spots on glasses?
Spots are often caused by missing rinse aid or hard water. Add rinse aid to the dispenser and adjust the dosage switch. Also, set the water softener according to your water hardness.
How do I connect the dishwasher to the water supply?
Connect the inlet hose to a cold water supply with a 3/4 inch fitting, ensuring the pressure is within 0.03-1 MPa. The outlet hose must be routed to a drain, at a height of 30-100 cm from the floor.
How can I prevent bad smells inside the dishwasher?
Run a hot cycle with an empty load and a dishwasher cleaner, clean the filters, door seal, and the spray arms. Leave the door slightly open after use to allow drying and prevent mold.
User questions about SDW455I Sauber
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SDW455I - Sauber and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDW455I by Sauber.
USER MANUAL SDW455I Sauber
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sauber
Model : SDW455I
Category : Dishwasher