SHOME-146 - Alarm system Steren - Free user manual and instructions
Find the device manual for free SHOME-146 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Home alarm system |
| Brand | Steren |
| Model | SHOME-146 |
| Main unit dimensions | 13 x 9 x 3 cm |
| Main unit weight | 0.35 kg |
| Power supply | AC adapter 12V / 500mA |
| Backup battery | 9V battery (not included) |
| Wireless frequency | 433 MHz |
| Maximum wireless zones | 32 |
| Siren volume | 110 dB |
| Motion sensor range | 8 m, 110° angle |
| Door/window sensor type | Magnetic contact |
| Remote controls included | 2 key fobs |
| Keypad | LCD with backlight |
| Main functions | Arm/disarm, panic alarm, entry delay, low battery alert |
| Installation | Wireless, DIY surface mount |
| Maintenance | Wipe with dry cloth, test monthly |
| Safety certifications | CE, RoHS |
| Spare parts availability | Replacement sensors and remotes |
| Repairability | User-replaceable battery |
| Included accessories | 1 panel, 1 motion sensor, 1 contact sensor, 2 remotes, adapter |
| Warranty | 1 year limited |
Frequently Asked Questions - SHOME-146 Steren
How do I install the SHOME-146 alarm system?
Start by placing the control panel near an AC outlet. Install the motion sensor at a height of 2 meters and the door/window sensor on the frame. Then press the pairing button on the panel and trigger each sensor to sync. Finally, test the system with the remote.
Can I operate the alarm without the remote control?
Yes, enter your PIN code on the keypad to arm or disarm the system. The remote is an additional convenience, not mandatory.
What happens if the backup battery is low?
The panel shows a low battery indicator. Replace the 9V battery with a new one to ensure the alarm works during power outages.
How do I add extra sensors to the system?
Put the control panel in learning mode by pressing and holding the pairing button. Then activate the new sensor, and it will be registered to an available wireless zone.
Does this alarm send notifications to my smartphone?
No, the SHOME-146 is a standalone siren system. It does not include Wi-Fi or cellular connectivity for remote alerts. You will hear the siren only on site.
How do I turn off a triggered alarm?
Enter your PIN code on the keypad or press the disarm button on the remote control. The siren stops immediately.
What is the wireless range between sensors and the control panel?
In an open area, the range is up to 100 meters. Walls and metal objects can reduce this distance, so place sensors within 30 meters of the panel in typical homes.
Can I expand the system with more motion detectors?
Yes, the system supports up to 32 wireless zones. You can add extra motion detectors, door sensors, and even remote controls as long as they use the same 433 MHz protocol.
How should I clean and maintain the alarm system?
Use a soft dry cloth to wipe the surfaces. Do not use water, spray cleaners, or abrasive materials. Test all sensors monthly and replace batteries as needed.
What should I do if a sensor stops working?
First check the battery in the sensor. If the battery is fine, re-pair the sensor by following the learning mode procedure. If it still fails, reposition the sensor closer to the panel or contact support.
User questions about SHOME-146 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual SHOME-146 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHOME-146 by Steren.
USER MANUAL SHOME-146 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : SHOME-146
Category : Alarm system