SHOME-167 - Alarm system Steren - Free user manual and instructions
Find the device manual for free SHOME-167 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Alarm System |
| Brand | Steren |
| Model | SHOME-167 |
| Intended Use | Residential intrusion detection and alert |
| Power Supply | AC adapter 100-240V, 50/60Hz |
| Backup Battery | Rechargeable battery for power outage protection |
| Control Panel Dimensions | 18 x 12 x 3 cm |
| Total Weight | 0.5 kg (control panel and accessories) |
| Wireless Frequency | 433 MHz |
| Communication Range | Up to 100 m in open space |
| Sensors Included | Door/window contact sensors, motion detector |
| Motion Detection Range | Up to 8 m, 90° angle |
| Siren Volume | 100 dB |
| Operating Temperature | 0°C to 50°C |
| Installation | DIY wireless installation, no wiring needed |
| Arming/Disarming | Remote control or keypad entry |
| Panic Function | Dedicated panic button for emergencies |
| Low Battery Notification | Audible and LED warning on sensors and remote |
| Cleaning and Maintenance | Wipe with dry soft cloth; replace batteries as needed |
| Safety Features | Tamper alarm, manual override, auto re-arm |
| Spare Parts Availability | Replacement sensors, remotes, and batteries |
| Repairability | Modular components; user-replaceable parts |
Frequently Asked Questions - SHOME-167 Steren
How do I install the SHOME-167 alarm system?
Place the control panel near an entry point, mount door/window sensors on frames, and position the motion detector in a corner. The wireless setup requires no special tools. Follow the user manual to pair sensors with the control panel.
How do I arm or disarm the system?
Use the included remote control to press the arm/disarm button, or enter your PIN code on the keypad if available. The system will chirp and show a LED confirmation.
What does the flashing red LED mean?
A flashing red LED indicates that the system is armed or that a sensor was triggered. Refer to the indicator chart in the manual for exact patterns.
How do I replace the batteries in the sensors?
Open the battery compartment on the back of each sensor, remove the old CR2032 batteries, and insert new ones observing polarity. Reattach the cover and test the sensor.
Can I add extra sensors to the system?
Yes, the system supports up to 32 wireless devices. Pair additional sensors using the programming mode on the control panel.
How do I adjust the siren volume?
The siren volume is preset but can be lowered by accessing the setting menu. Some models have a volume button on the side of the control panel.
What happens during a power outage?
The built-in backup battery keeps the alarm operating. The system switches to battery power and continues to monitor and alert you.
Is the SHOME-167 compatible with smartphone apps?
This model is not Wi-Fi enabled. It works with its remote control and keypad. For app compatibility, consider a smart alarm model.
How do I stop false alarms?
Check sensor placement and adjust the motion detector's sensitivity. Ensure all doors and windows are secure before arming. Clean sensors to avoid dust accumulation.
How do I clean and maintain the alarm system?
Power off the system and wipe surfaces with a dry microfiber cloth. Do not use water or solvents. Batteries should be checked every 6 months.
User questions about SHOME-167 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual SHOME-167 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHOME-167 by Steren.
USER MANUAL SHOME-167 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : SHOME-167
Category : Alarm system