Forcesilence 560 Woodstyle - Ceiling fan CECOTEC - Free user manual and instructions
Find the device manual for free Forcesilence 560 Woodstyle CECOTEC in PDF.
| Brand | Cecotec |
| Model | Forcesilence 560 Woodstyle |
| Product type | Floor fan for indoor use |
| Reference | 05908 / 05909 / 05910 |
| Rated power | 60 W |
| Voltage / frequency | 220-240 V ~ 50 Hz |
| Maximum air flow | 44.98 m³/min |
| Fan power (service) | 39.60 W |
| Service value | 1.14 (m³/min)/W |
| Standby power consumption | 0.26 W |
| Acoustic power level | 59.68 dB(A) |
| Maximum air speed | 3.08 m/s |
| Measurement standard | IEC 60879:1986 |
| Number of speeds | 3 speeds (1 low, 2 medium, 3 high) + stop (0) |
| Oscillation | Yes, operated by a button |
| Tilt adjustment | Yes, manual head tilt |
| Protective grilles | Yes, front and rear grilles |
| Control type | Mechanical buttons |
| Cleaning | Unplug, use a soft damp cloth with a neutral detergent |
| Safety | Do not insert objects, do not use near water, unplug when not in use |
| Spare parts | Grilles, blades, cap, nuts, screws available through after-sales service |
| Repairability | Repairs by Cecotec Official After-Sales Service |
| Origin | Made in China, designed in Spain |
Frequently Asked Questions - Forcesilence 560 Woodstyle CECOTEC
User questions about Forcesilence 560 Woodstyle CECOTEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Ceiling fan in PDF format for free! Find your manual Forcesilence 560 Woodstyle - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Forcesilence 560 Woodstyle by CECOTEC.
USER MANUAL Forcesilence 560 Woodstyle CECOTEC


- Parts and components 31
- Before use 31
- Product assembly 31
- Operation 32
- Cleaning and maintenance 32
- Technical specifications 32
- Disposal of old electrical appliances 33
- Technical support and warranty 33
- Copyright 33
SOMMAIRE
Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.
- Never insert fingers, pencils or other objects through the grill when the appliance is running.
- Make sure the appliance is placed on a stable surface when in use.
- Do not use your appliance near a window, rain could cause an electric shock.
- Never leave the appliance running unattended, constant supervision is required.
- Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
- Do not open the grids while the device is operating.
- Do not touch the blades nor remove them during operation.
- Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid. Do not expose
the electrical connections to water. Make sure your hands are completely dry before handling the plug or switching on the appliance.
- If the appliance falls accidentally into water, unplug it immediately. Do not reach into the water!
- Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger.
- Do not move the product or pull from it from its cord. Do not use the cable as handle. Do not push the cord against corners or sharp edges. Do not pass the product over the power cord. Keep the cord away from hot surfaces.
- Do not use the appliance if its cord, plug, or housing is damaged, nor after it malfunctions or has been dropped or damaged in any way.
- Keep the product away from the heat sources.
- Keep hair, clothes, fingers and other body parts away from openings and moving parts of the product.
- Do not leave the appliance unattended while in use. Unplug it from the power supply when you finish using it and before leaving the room.
- Do not try to repair the product by yourself. Contact the official Technical Support Service of Cecotec.
- Always turn off and unplug the appliance when not in use, before moving it to a new location and before assembling or disassembling it. To avoid tipping over, wind the cord safely.
- To ensure the correct operating of the device, cleaning and maintenance tasks must be carried out according to this instruction manual. Always turn off and unplug the appliance before cleaning.
-
Store the appliance and its instruction manual in a safe and dry place when not in use.
-
Make sure the fan is not placed close to curtains or other objects that could tangle.
- Do not place the cable beneath the carpet or cover it, place it in a room with no obstacles and where it cannot be tipped over.
- Operate the fan in a wide area. Allow a free space of at least 20 cm from the device to the wall when it is operating in order to ensure correct air circulation.
- This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. The cleaning and maintenance of the appliance should not be carried out by children without supervision.
- Keep this appliance and its power cord out of reach of children under the age of 8.
INSTRUCTIONS DE SÉCURITÉ
- Front grid
- Blade-fixing element
- Blades
- Back grid fixing nut
- Back grid
- Shaft
- Oscillation operation button
- Telescopic tube
- Adjusting screw
- Fan support
- Base
- Base tightening nut
(*) The graphics in this manual are schematic representations and may not exactly match the product.
2. BEFORE USE
- The product must be installed following national regulations and law. It is designed for household use only.
- Before plugging the device:
- Power must be in accordance with the label.
- The power supply must be well installed.
- The product cord fits correctly into the socket.
- This product must be connected to a 220-240V (50-60Hz) power supply.
3. PRODUCT ASSEMBLY
- Turn the blade screw (2) and the back grid fixing nut (4) anticlockwise to remove both parts from the motor shaft.
- Assemble the back grid (5) so that the handle is facing upward.
- Insert and tighten the fixing nut of the back grid (4) and fix it (5).
- Assemble the blades (3) onto the shaft (6) until they fit with the back grid fixing nut (4).
- Tighten the blade screw (2) onto the shaft (6) anticlockwise.
- Fix the front grid (1) onto the back grid (5), the small holes on each grid must fit perfectly using 3 clips to lock them safely.
4. OPERATION
- In order to activate or stop the air oscillation function, press or pull from button (7).
- To adjust air direction, tilt the fan head downward or upward.
- Air speed can be adjusted by the following buttons:
- 0: Off / 1: Low / 2: Medium / 3: High
- Plug the cord into a power supply.
5. CLEANING AND MAINTENANCE
- Always unplug the product from the power supply before cleaning or repairing it.
- It is suggested to clean the product with a mild cleaning agent and a soft and wet cloth. Do not use abrasive products such as solvents, acidic detergents or alcohol to clean the plastic components as these could be deformed or damaged.
- Do not allow water to enter the motor or touch the cord during cleaning.
6. TECHNICAL SPECIFICATIONS
Technical specifications may change without prior notification to improve product quality.
Product reference: 05908/05909/05910
Product: EnergySilence 560 Woodstyle/EnergySilence 570 Steelstyle/EnergySilence Retrostyle
Power: 60 W
Voltage and frequency: 220-240 V\~50 Hz
| Description | Symbol | Value | Unit |
| Fan maximum flow | F | 44.98 | m^3/min |
| Fan power consumption | P | 39.60 | W |
| Service value | S_V | 1,14 | (m^3/min)/W |
| Power consumption on standby mode | P_SB | 0,26 | W |
| Fan sound power level | L_WA | 59.68 | dB (A) |
| Maximum air speed | C | 3.08 | m/seg |
| Service value measurement standard | IEC 60879_1986 (corr. 1992) | ||
| Contact details to obtain more information | Cecotec Innovaciones S.L.C/ de la Pinadeta s/n, 46930Quart de Poblet, Valencia (Spain) | ||
Manufactured in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help to protect the environment.
8. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec official Technical Support Service at +34 963 210 728.
9. COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.
1. PIÈCES ET COMPOSANTS
Img. 1 (*)
Fig./Img./Abb./Afb./ Rys./Obr. 1
www.cecotec.es
Cecotec Innovaciones S.L. C/ de la Pinadeta s/n, 46930 Quart de Poblet, Valencia (Spain)
EA03211220