MPX-6 - Mixeur-Router CROWN - Free user manual and instructions
Find the device manual for free MPX-6 CROWN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Mixer-Router |
| Brand | Crown |
| Model | MPX-6 |
| Number of Channels | 6 input channels |
| Main Outputs | 2 balanced XLR outputs |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | Better than 90 dB |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 20 W |
| Dimensions (W x D x H) | 19" x 8" x 1.75" (483 x 203 x 44 mm) |
| Weight | 5.5 lb (2.5 kg) |
| Input Connectors | Combo XLR and 1/4" TRS |
| Routing Capability | Flexible bus routing for main and monitor mixes |
| Equalization | 3-band EQ on each channel |
| Phantom Power | 48 V switchable for condenser microphones |
| Aux Sends | 2 auxiliary sends per channel |
| Output Metering | LED level meters on main outputs |
| Rack Mountability | 1U rack mount included |
| Operating Temperature | 0°C to 40°C |
| Cleaning and Maintenance | Wipe with a dry soft cloth; avoid solvents and liquids |
| Safety Compliance | CE and UL certified with grounded power cord |
| Repairability | Replaceable fuse and modular channel cards |
Frequently Asked Questions - MPX-6 CROWN
How do I connect a microphone to the MPX-6?
Connect your microphone to any of the combo XLR/TRS inputs on the rear panel. For condenser microphones, ensure 48V phantom power is enabled via the corresponding switch.
Can I use the MPX-6 with a computer or recording interface?
Yes, connect the main XLR outputs or RCA tape outputs to your computer's audio interface using appropriate cables. The mixer's line-level outputs are compatible with standard recording equipment.
How do I activate phantom power for condenser microphones?
Locate the 48V phantom power switch on the top panel or rear side. Press it to apply +48V DC power to all microphone input channels. Always turn down the master volume before engaging phantom power to avoid loud pops.
What is the best way to prevent feedback during live use?
To prevent feedback, position speakers in front of the microphones, reduce gain on the affected channels, and use the 3-band EQ to cut high-mid frequencies around 2-4 kHz that often cause ringing. Also avoid excessive monitor levels.
How do I route audio to external effects processors?
Use the aux send outputs to connect to your effects unit's input. Return the processed signal to any available line input channel. Adjust the aux send level per channel to control how much signal feeds the effect.
Is the MPX-6 suitable for live performances?
Absolutely. With its 6 input channels, 2 aux sends, and durable rack-mountable design, the MPX-6 is ideal for small to medium live gigs, conferences, and installations.
How do I clean and maintain the mixer?
Disconnect the power first. Use a soft dry cloth to wipe the surface and controls. Do not use water, chemical cleaners, or abrasive materials. Regularly check and tighten connection cables to ensure reliable performance.
What does the 'Router' function on the MPX-6 do?
The Router section allows you to assign input channels to different mix buses (e.g., main, monitor, aux). This flexibility lets you create separate mixes for front-of-house and stage monitors without external patching.
Can I mount the MPX-6 in a standard equipment rack?
Yes, the MPX-6 is designed as a 1U rack-mountable unit. Use the included rack ears to mount it securely in a 19-inch rack. Ensure proper ventilation around the unit.
How do I replace the fuse if it blows?
Turn off and unplug the mixer. The fuse holder is located near the power inlet. Gently pry it open and replace the fuse with one of the same rating (indicated near the holder). If the fuse blows again, consult a qualified technician.
User questions about MPX-6 CROWN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixeur-Router in PDF format for free! Find your manual MPX-6 - CROWN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MPX-6 by CROWN.
USER MANUAL MPX-6 CROWN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CROWN
Model : MPX-6
Category : Mixeur-Router