CTWDV150VH - Water heater CORBERO - Free user manual and instructions
Find the device manual for free CTWDV150VH CORBERO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric storage water heater |
| Brand | Corbero |
| Model | CTWDV150VH |
| Tank Capacity | 150 liters |
| Installation Type | Vertical floor-standing |
| Rated Power | 2000 W |
| Power Supply | 220-240 V ~ 50 Hz |
| Heating Element | Copper sheathed heating element |
| Temperature Control | Adjustable thermostat up to 75°C |
| Maximum Water Temperature | 75°C |
| Maximum Working Pressure | 0.8 MPa (8 bar) |
| Inner Tank Material | Enamelled steel |
| Outer Casing Material | Powder-coated steel |
| Thermal Insulation | High-density polyurethane foam |
| Heating Time to 75°C | Approx. 6 hours |
| Dimensions (H x W x D) | 1320 x 560 x 560 mm |
| Dry Weight | 50 kg |
| Safety Features | Overheat protection, pressure safety valve, thermostat |
| Maintenance and Cleaning | Drain tank and inspect anode regularly |
| Spare Parts and Repairability | Replaceable heating element and sacrificial anode |
| Included Accessories | Safety valve, thermostat, installation kit |
| General Information | CE marked, user manual included |
Frequently Asked Questions - CTWDV150VH CORBERO
How long does the Corbero CTWDV150VH take to heat water?
A full 150 L tank heats from cold to 75°C in approximately 6 hours using the 2000 W heating element. Actual time depends on the inlet water temperature and ambient conditions.
Can the water heater be installed horizontally?
The Corbero CTWDV150VH is designed for vertical floor-standing installation. Installing it in another orientation may damage the heating element and affect the safety valves.
Why is the pressure relief valve leaking water?
A slight drip can be the valve releasing pressure when the tank expands during heating. If it discharges continuously, check the water pressure and make sure the valve is not faulty.
What important maintenance should I do regularly?
Every year, check the magnesium sacrificial anode and drain the tank to remove sediment. The safety pressure valve should also be tested regularly to prevent blockages.
What power supply is needed for this water heater?
It requires a 220-240 V, 50 Hz supply with a rated power of 2000 W. A dedicated circuit with a suitable breaker and RCD is recommended.
How does the thermostat and overheating protection work?
The thermostat controls water temperature up to 75°C. The integrated overheat cut-off switches the heating element off if the internal temperature becomes too high.
Can I use the water heater to supply multiple bathrooms?
With a 150-liter storage capacity and a recovery time of about 6 hours, it can supply a household with several bathrooms when demand is spread out.
How do I change the heating element or anode?
After draining and disconnecting the power, the heating element and anode can be accessed through the standard flange. Replace with genuine Corbero spare parts to ensure safety.
What is the maximum water temperature and pressure?
The thermostat is normally adjustable up to 75°C. The tank is designed for a maximum working pressure of 0.8 MPa (8 bar).
What should I check if there is no hot water from the CTWDV150VH?
Check the circuit breaker, thermostat setting, and the safety or reset button. If the heating element has failed, it is replaceable using Corbero spares.
User questions about CTWDV150VH CORBERO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual CTWDV150VH - CORBERO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CTWDV150VH by CORBERO.
USER MANUAL CTWDV150VH CORBERO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CORBERO
Model : CTWDV150VH
Category : Water heater