CTWDV50VH - Water heater CORBERO - Free user manual and instructions
Find the device manual for free CTWDV50VH CORBERO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | CTWDV50VH |
| Brand | Corbero |
| Capacity | 50 liters (13.2 gallons) |
| Mounting Type | Vertical wall-mounted |
| Power Rating | 2000 W |
| Voltage | 220-240 V, 50 Hz |
| Temperature Range | 35°C to 75°C |
| Heating Time | Approx. 2 hours for full tank (from 15°C to 60°C) |
| Thermostat | Adjustable mechanical thermostat |
| Safety Valve | Pressure relief valve included |
| Anti-Dry Protection | Yes |
| Tank Material | Enamelled steel |
| Insulation | High-density polyurethane foam |
| Weight | 22 kg (empty) |
| Dimensions | Height: 650 mm, Diameter: 430 mm |
| Connection | 1/2" BSP inlet/outlet |
| Maximum Pressure | 0.8 MPa (8 bar) |
| Control Type | Mechanical thermostat |
| Indicator Light | Power on/off indicator |
| Ingress Protection | IPX4 |
| Maintenance | Periodic flushing and anode rod inspection |
| Spare Parts | Genuine Corbero replacement parts available |
| Repair Index | Repairable with accessible components |
Frequently Asked Questions - CTWDV50VH CORBERO
How do I adjust the water temperature on my Corbero CTWDV50VH?
Use the thermostat dial on the front of the heater. Turn it clockwise to increase temperature or counterclockwise to decrease. The range is typically 35°C to 75°C. Allow time for the tank to reach the setting.
How long does it take to heat a full tank of water?
With a 2000W element and a 50L tank, heating time from cold (15°C) to 60°C is approximately 2 hours. Actual time depends on incoming water temperature and ambient conditions.
What maintenance does my water heater require?
Periodically flush the tank to remove sediment, check the pressure relief valve by lifting the lever, and inspect the anode rod every 1-2 years. Replace if corroded.
Why is there no hot water coming out?
Ensure the power is on and the thermostat is set high enough. Check the circuit breaker and the heater's on/off switch. If still no hot water, the heating element may be faulty and need replacement.
Can I install the CTWDV50VH horizontally?
No, this model is designed for vertical wall-mounted installation only. Horizontal placement would affect operation and could cause damage.
What safety features are included?
The heater includes a pressure relief valve, thermal overload protection, anti-dry heating cutoff, and an IPX4 splash-proof casing. Always follow installation instructions.
Is it safe to operate the heater without water in the tank?
No. The anti-dry protection will shut off the power to prevent burn-out, but you should never intentionally run the heater dry. Fill the tank before turning on.
How do I clean the exterior of the heater?
Disconnect the power first. Wipe with a soft damp cloth and mild detergent. Avoid abrasive cleaners or water directly on the control panel.
What is the maximum water pressure allowed?
The maximum working pressure is 0.8 MPa (8 bar). If your supply pressure is higher, install a pressure reducing valve.
Where can I find spare parts for this model?
Spare parts such as heating elements, thermostats, and anode rods are available on our website. Search for Corbero CTWDV50VH parts or contact our support team.
User questions about CTWDV50VH CORBERO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual CTWDV50VH - CORBERO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CTWDV50VH by CORBERO.
USER MANUAL CTWDV50VH CORBERO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CORBERO
Model : CTWDV50VH
Category : Water heater