Forcesilence 500 - Ceiling fan CECOTEC - Free user manual and instructions

Product type	Pedestal fan
Model	EnergySilence 500 / EnergySilence 510
Reference	05900 / 05901
Power supply	220-240 V ~ 50/60 Hz
Rated power	45 W
Maximum air flow	38 m³/min
Maximum air speed	2,8 m/s
Acoustic power level	55 dB(A)
Service value	0,9 (m³/min)/W
Standby power consumption	0 W
Number of speeds	3 speeds (low, medium, high)
Oscillation	Yes, button control
Height adjustment	Telescopic tube with adjusting nut
Head tilt	Adjustable vertical orientation
Protection	Front and rear grilles, blade fixing cap
Cleaning	Unplug before cleaning, soft damp cloth, neutral detergent
Safety	Do not use near a window, wall distance > 20 cm
Warranty	Official Cecotec After-Sales Service ([phone])
Manufacturing	Designed in Spain, made in China

Frequently Asked Questions - Forcesilence 500 CECOTEC

How to assemble the EnergySilence 500 fan?

To assemble the fan, place it on a stable surface. Adjust the height of the telescopic tube by turning the adjusting nut. Then mount the grilles and blades onto the motor's central shaft following the order illustrated in the manual (rear grille, blades, front grille, junction ring). Insert the motor assembly into the telescopic tube. Verify that all parts are securely fastened before plugging in.

How to adjust the fan speed?

The fan has three speed buttons. Use the first button for low speed, the second for medium speed, and the third for high speed. To stop, press the corresponding button (position 0). Standby power consumption is zero.

How to activate oscillation?

Air flow oscillation is controlled via the oscillation button (number 5). Press or pull this button to activate or deactivate the left-to-right movement of the fan.

How to adjust the fan height?

To change the height, loosen the adjusting nut on the telescopic tube, adjust the tube length to the desired height, then retighten the nut. Make sure the base is stable before use.

Is it possible to direct the airflow upwards or downwards?

Yes, manually tilt the fan head downwards or upwards to direct the air in the desired direction. The tilt angle is smoothly adjustable.

How to maintain and clean the fan?

Before any cleaning operation, unplug the appliance. Use a soft damp cloth with a neutral detergent. Never use solvents, acids, petroleum, or alcohol that could damage the plastic parts. Ensure that water does not enter the motor or the power cord.

What safety instructions should be followed?

Do not allow children under 8 years old to use the appliance without supervision. Do not touch the moving blades. Keep the fan more than 20 cm from walls for proper air circulation. Do not use it near a window to avoid any risk of short circuit. Never immerse the appliance in water and do not touch the plug with wet hands.

What is the standby power consumption?

The fan complies with EN 50564:2011 and European regulations 1275/2008/EC and 801/2013/EC. Standby power consumption is 0 W. To enter this mode, simply plug in the device without activating any function and wait for standby mode to activate.

The fan is noisy, is that normal?

The maximum acoustic power level is 55 dB(A) (IEC 60879 standard). This level complies with the product specifications. If you notice any abnormal or excessive noise (squeaks, clicking), check that all parts are correctly assembled and that the blades do not touch the grille. Contact after-sales service if the problem persists.

Where can I get spare parts or have my fan repaired?

For any spare part or repair, contact the official Cecotec After-Sales Service at [phone]. It is recommended to have repairs done by qualified personnel. Never attempt to repair the appliance yourself, as this would pose a danger.

USER MANUAL Forcesilence 500 CECOTEC

Safety instructions 7

1. Parts and components 34

2. Before use 34

3. Assembly 35

4. Operation 35

5. Cleaning and maintenance 35

6. Technical specifications 36

7. Disposal of old electrical and electronic appliances 36

8. Technical support and warranty 37

9. Copyright 37

SOMMAIRE

Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.

• All safety instructions must be closely followed when using the appliance.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.

- This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.

- Never insert fingers, pencils, or other objects through the air outlet when the appliance is running.

- Make sure the appliance is placed on a flat, stable surface when in use.

- Do not use the appliance near a window, as exposure to rain could cause electric shock.

- Make sure that the mains voltage matches the voltage stated on the appliance marking and that the wall outlet is earthed.

- Do not touch the blades or remove them during operation.

- Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid. Do not expose the electrical connections to water.

Make sure your hands are dry before handling the plug or switching on the device.

• Never immerse the appliance in water. Do not touch the water!
• Check the power cable regularly for visible damage. If the cable is damaged, it must be repaired by the official Cecotec Technical Support Service to avoid any type of danger.
• Do not carry or pull the appliance from the power cable. Do not use the power cable as handle. Do not push the cable against corners or sharp edges. Do not crush the power cable with the full weight of the appliance. Keep the cable away from hot surfaces.
• Do not operate the appliance if its cable, plug, or body show visible damage, do not operate properly, or have been dropped.
• Keep the product away from heat sources.
• Keep hair, clothes, fingers, and other body parts away from openings and moving parts of the product.
• Do not leave the appliance unattended while in use. Unplug it from the power supply when you finish using it and before leaving the room.
• Do not try to repair the appliance by yourself. Contact the official Cecotec Technical Support Service.
• Always turn off and unplug the appliance when not in use, before moving it to a new location, and before assembling or disassembling it. To avoid tripping hazards, wind the cable safely.
• Make sure the fan is not placed close to curtains or other objects it may become entangled with.

• Do not place the cord beneath the carpet or cover it. Place the appliance in a room with no obstacles and where it cannot be tipped over.

• Operate the fan in a wide area. Allow a free space of at least 20 cm between the appliance and the wall to ensure good air circulation when in operation.

• Keep this appliance and its power cable out of reach of children under the age of 8.

INSTRUCTIONS DE SÉCURITÉ

1. Front grille
2. Blades
3. Rear grille
4. Motor cover
5. Oscillation button
6. Motor
7. Screw
8. Telescopic tube
9. Adjusting nut
10. Base cover
11. Base tube
12. Central motor shaft
13. Fan speed buttons
14. Back grille nut
15. Fan-blade fixing cap
16. Grille fastening ring
17. Ring lock
18. Decorative cover
19. Base

NOTE:

the graphics in this manual are schematic representations and may not exactly match the device.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

• Pedestalfan
• Instruction manual

3. ASSEMBLY

• Place the device on a dry, flat, and safe surface.
• Adjust the telescopic tube (8) to the desired height by turning the adjusting nut (9).
• Assemble all the fan pieces (3, 14, 2 15, 16, 17, 1, and 18) in the central hub (12) as shown on Figure 1.
• Insert the motor unit (6 and 13) in the fan with the blades previously installed in the telescopic tube (8).

4. OPERATION

• Connect the power cable to a plug socket.
• To activate or stop air oscillation, press, or pull the button (5).
• To adjust air direction, tilt the fan head downward or upward.
• Air speed can be adjusted by pressing one of the following buttons:

○○○:off
●○○: low speed
●○: medium speed
: high speed

5. CLEANING AND MAINTENANCE

• Always unplug the product from the power supply before cleaning or repairing it.
• It is suggested to clean the product with a mild cleaning agent and a soft and wet cloth. Do not use abrasive products such as solvents, acids, or alcohol to clean the plastic components, as these could be deformed or damaged.
• Do not allow water to enter the motor or touch the cord during cleaning.

6. TECHNICAL SPECIFICATIONS

Product reference: 05900/05901

Product: EnergySilence 500 / EnergySilence 510

Voltage and frequency: 220-240 V\~50-60 Hz

Power: 45 W

Description	Symbol	Value	Unit
Fan maximum flow	F	38.0	m^3/min
Fan power consumption	P	40.8	W
Service value	SV	0.9	(m^3/min)/W
Power consumption on standby mode	P_SB	0	W
Fan sound power level	L_WA	55	dB (A)
Maximum air speed	C	2.8	m/seg
Service value measurement standard	IEC 60879
Contact details to obtain more information	Cecotec Innovaciones SL.Av. Reyes Católicos, 60, 46910, Alfafar (Valencia), SPAIN

The power consumption in standby mode is 0 W using the guidelines of EN 50564:2011 and the European regulations 1275/2008/EC and 801/2013/EC. For this purpose, the device is connected to the mains without performing any function, waiting for the standby mode to be activated.

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

9. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC

INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

FRANÇAIS

1. PIÈCES ET COMPOSANTS

Img. 1